Key takeaways
- BDFHYK DG508 coils plus iridium SP493 plugs for Ford trucks and SUVs. Complete fitment, the 2-valve warning and the checks to run before you order.
A misfire on an older Ford truck rarely means one bad part. Worn coils and tired spark plugs fail together, and replacing only one side of the pair leaves the other to fail a few months later. That is the real decision behind a coil-and-plug kit: whether to fix the whole ignition set at once, with matched parts, or to chase single-cylinder misfires one repair at a time. A complete kit also removes the guesswork of matching coil part numbers to plug types. On trucks of this age, the coils have lived through the same heat cycles for years, so when one fails the rest are rarely far behind.
This guide is for owners of older Ford trucks, SUVs and Mustangs with 4.6L and 5.4L V8 engines who want the full ignition set in one box. The BDFHYK kit below was picked from its Amazon listing and the brand’s own store, and the sections that follow cover fitment, the critical 2-valve warning, and what to verify before ordering.
Quick Picks
As an Amazon Associate we earn from qualifying purchases
| Product | Best for | Key spec from title |
|---|---|---|
| BDFHYK Ignition Coil DG508 and Spark Plug SP493 Kit | Full ignition refresh on older Ford V8 trucks and SUVs | 8 DG508 coils plus 8 iridium SP493 spark plugs, set of 8 |
How to Choose
Match the coil part number first
Coils are not interchangeable across Ford engine families, so the part number comes before everything else. This kit uses coil OE part number DG508, which covers the long list of cross-references on the Amazon listing, from DG481 and DG491 to FD-507 and IC369. The kit’s manufacturer part number is BD-05-01874-SZ. Before ordering, pull one coil from your engine and read the number stamped on it, then compare it with DG508. The listing’s cross-reference list is long, so a part-number match beats a visual match every time. A visual match is not enough, because Ford used similar-looking coils with different connectors across model years.
Confirm your engine is a 2-valve
This is the check that matters most, and it is easy to get wrong. The BDFHYK kit fits 4.6L and 5.4L V8 engines with two valves per cylinder only. It is not compatible with 3-valve 5.4L engines, which are typically found in 2004 and later models and need the DG511 style coil pack instead. A 3-valve engine with DG508 coils will not run right, and the mistake only shows up after the parts are fitted. Check your engine code or VIN before ordering, and if the listing for your model year mentions a 3-valve engine, this kit is the wrong one. A quick VIN lookup or a call to a Ford parts desk settles the question in minutes.
Check the spark plug type and gap
The plugs in this kit are iridium SP493, also listed as SP479, with a fine-wire iridium electrode, a factory-set gap of 1.3 mm and a heat range of 6, according to the brand’s own store. Iridium plugs last longer than copper plugs and hold their gap better, which matters on an engine where plug changes are a long job. Do not re-gap iridium plugs with a coin-style tool, because the fine electrode is easy to damage. If a plug arrives with a visibly bent electrode, set it aside and contact the seller rather than fitting it. A damaged electrode can misfire from the first start and cost you the job twice over.
Count the parts and plan the job
The box holds eight ignition coils and eight spark plugs, sixteen pieces in total, which is one full set for a V8. That count is the whole point of a kit: every cylinder gets a fresh coil and a fresh plug at the same time, so the ignition system ages evenly from here on. Plan the job with the engine cold, a torque wrench for the plugs, and dielectric grease for the coil boots. On many of these trucks the rear plugs are hard to reach, so budget extra time for the back cylinders and do not rush the coil connectors. Label each coil connector as you remove it, so every wire goes back to the cylinder it came from.
The 1 Best Option
BDFHYK Ignition Coil DG508 and Spark Plug SP493 Kit
The BDFHYK kit is a full ignition refresh: eight DG508 coils and eight iridium SP493 spark plugs, matched to the same set of Ford V8 engines. The coils carry an OE cross-reference list that covers the DG508 family, and the brand site lists output up to 35,000 V, so the kit is built for the engines it fits rather than a generic universal part. For an owner chasing a misfire across several cylinders, replacing the whole set at once is cheaper in time and frustration than swapping coils one by one. The brand’s own store backs the same kit, which makes it easier to confirm fitment before you buy.
Specs
- Package: 8 ignition coils plus 8 spark plugs (16 pieces total)
- Coil OE part number: DG508 (also DG481, DG491, FD-507, IC369 and others on the listing)
- Spark plug OE: SP493, SP479; also AGSF22WM, AGSF-22W-MF4 per the brand site
- Manufacturer part number: BD-05-01874-SZ
- Voltage output: up to 35,000 V per the brand site
- Spark plugs: fine-wire iridium electrode, factory-set 1.3 mm gap, heat range 6
- Engines: Ford, Lincoln and Mercury 4.6L and 5.4L V8, 2-valve engines only
- Date first available: April 23, 2022
- Automotive fit type: Vehicle Specific Fit
Best for: Owners of older Ford F-150, F-250, Expedition, Explorer, Crown Victoria and Mustang V8s doing a complete ignition refresh.
Watch out for: the Amazon listing crawl is about 310 days old, so check live Amazon availability before ordering, and never fit this kit to a 3-valve 5.4L engine.
Which One Fits Your Situation
Your truck misfires on several cylinders
This kit is the right call. A misfire that moves between cylinders usually means the whole ignition set is worn, and replacing all eight coils and all eight plugs at once fixes the system rather than one symptom. The DG508 coils and SP493 plugs are matched to the same engines, so the set ages evenly from the day you fit it.
You have a single-cylinder misfire
A full kit still makes sense if the truck is high mileage, because the other seven coils are the same age as the failed one. If the truck is low mileage and only one coil has failed, a single coil may be the cheaper fix, but check the plugs on the other cylinders while you are in there, since worn plugs stress the coils.
You own a 2004 or later 5.4L
Stop and check the valve count before you order. The BDFHYK kit fits 2-valve engines only, and 3-valve 5.4L engines from around 2004 onward need the DG511 style coil pack instead. Fitting DG508 coils to a 3-valve engine will not work, so confirm the engine code or VIN first. A parts desk can decode the VIN in seconds, and that check is far cheaper than returning a fitted kit.
You are unsure which coil your engine uses
Pull one coil and read the number stamped on it, then compare it with DG508. Do not order on looks alone, because Ford used similar coils with different connectors. If the number does not match DG508, this kit is not the one for your engine, even if the truck model appears on the fitment list.
Common Mistakes
- Fitting the kit to a 3-valve 5.4L engine, which needs DG511 coils instead of DG508.
- Replacing only the failed coil and leaving seven worn coils to fail in the following months.
- Re-gapping iridium plugs with a coin-style tool and damaging the fine-wire electrode.
- Confusing this BDFHYK kit with the MAS DG508 and SP493 kit, a different brand’s product.
- Fitting plugs to a hot engine or without a torque wrench, and stripping the threads in the head.
Frequently Asked Questions
Which engines does this kit fit?
The kit fits Ford, Lincoln and Mercury 4.6L and 5.4L V8 engines with two valves per cylinder. That includes the F-150 4.6L from 2000 to 2010 and the 5.4L from 1997 to 2003, plus the F-250, Mustang 4.6L, Explorer, Expedition, Crown Victoria, Grand Marquis and Mountaineer in the listed years. It does not fit 3-valve 5.4L engines. If your truck is not listed, check the coil number first.
How many parts are in the box?
Sixteen pieces in total: eight ignition coils and eight spark plugs. The listing calls it a set of 8, meaning eight cylinders, and one Amazon table row calls it a set of 16, meaning eight coils plus eight plugs. Every cylinder gets a fresh coil and a fresh plug in one purchase. Keep the box and part numbers for any warranty claim.
Why replace coils and plugs together?
Coils and plugs wear together, and a worn plug makes its coil work harder. Replacing only one side leaves the other to fail soon after, and on these trucks the rear plugs are hard to reach, so doing the job twice costs far more time than doing it once. A matched set also ages evenly, which keeps misfires from returning cylinder by cylinder. Do it once, with a cold engine.
Is this the same as the MAS coil kit?
No. The MAS kit is a different brand’s DG508 and SP493 set with its own part numbers. This article covers the BDFHYK kit only, manufacturer part number BD-05-01874-SZ, ASIN B09YNCNNDM. Check the brand and part number on the listing before ordering so you get the kit described here, not a lookalike from another brand.
FAQ
Which engines does this kit fit?
How many parts are in the box?
Why replace coils and plugs together?
Is this the same as the MAS coil kit?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.
