Updated Nov 22, 2026· 8 min read

Key takeaways

  • What the Astro Pneumatic 78835 exhaust pipe stretcher kit covers, the impact wrench it needs, its collet sizes, pipe limits, and the jobs it cannot do.

The real decision behind this kit shows up mid-job: a replacement muffler or mid-pipe is a fraction too small to slip over the pipe already on the car, and you either stretch the end you have or cut out a longer section and start over with fresh tubing, clamps and hangers. An exhaust pipe stretcher turns that second, bigger job back into a fitting job, but only inside the sizes and pipe materials the tool can actually move.

This guide is for home mechanics swapping mufflers in the driveway, shop technicians who join slip-fit sections every week, and anyone building a custom system one piece at a time. It covers a single kit, the Astro Pneumatic Tool 78835, chosen from the name and specifications on its Amazon listing, and it walks through the sizes it covers, the impact wrench it demands, and the work it cannot do. It also flags the extra socket the job requires, since that piece is sold separately.

Quick Picks

As an Amazon Associate we earn from qualifying purchases.

Product Best for Key spec from title
Astro Pneumatic Tool 78835 Exhaust Pipe Stretcher Kit Slip-fit exhaust joints and making exhaust seals on mild steel pipe Expands pipe from 1-5/8 in to 4-1/4 in

How to Choose

Match the Collet Range to the Pipes You Actually Own

Everything about a stretcher kit starts with diameter. The 78835 covers pipe from 1-5/8 in up to 4-1/4 in, and it does that with seven steel collets rather than one adjustable head: 1-5/8 to 2 in, 2 to 2-1/2 in, 2-3/8 to 2-3/4 in, 2-3/4 to 3-1/8 in, 3-1/8 to 3-1/2 in, 3-1/2 to 3-7/8 in, and 3-7/8 to 4-1/4 in. Before buying any kit in this class, measure the outside diameter of the pipes on your vehicles with a caliper, including the larger tubing on trucks, and confirm every size you care about falls inside the collet list with a little room to spare.

Plan Around a Serious Impact Wrench

This is an impact-driven tool, not a hand expander. A 28 mm bolt head drives the tool and the collet sets, and the listing recommends an impact wrench rated for 800 ft-lbs of tightening torque and above to do most jobs. That requirement decides whether the kit makes sense for you before anything else does. If your impact wrench is a compact model built for lug nuts and brackets, stretching a 3 in pipe will stall it. The 28 mm socket itself is not part of the kit, so add one to the list if your socket rail skips that size.

Check the Pipe Material Before You Count on It

The manufacturer describes this kit as a tool for expanding mild steel exhaust pipes, which is what most factory and replacement aluminized sections are made from. The listing makes no claim about stainless steel tubing, and stainless work-hardens and resists stretching far more than mild steel does, so treat a stainless system as a different job until you have confirmed the tool suits it. Condition matters just as much as material: a pipe end that is rusted thin, crushed or already split will tear instead of stretching, no matter which collet you fit.

Know What a Stretcher Cannot Do

A stretcher does exactly one thing: it expands the end of a straight pipe so another pipe can slip inside it and seal. It does not bend tubing, so a section that needs an angle still needs a bender or a pre-bent replacement. It does not form flanges, flare ends or repair damage in the middle of a span, and it cannot shrink an oversized pipe down. If the failure on your car is a cracked bend, a rotted mid-section or a broken flange face, a new pipe section is the right purchase and this kit stays in its case.

The 1 Best Option

Astro Pneumatic Tool 78835 Exhaust Pipe Stretcher Kit

The 78835 fits the mechanic who joins slip-fit exhaust sections often enough that borrowing a shop tool or paying for custom fitting stopped making sense. Its seven steel collets span the sizes found on most cars and light trucks, from small 1-5/8 in tubing to 4-1/4 in diesel-style pipe, and the impact drive expands an end quickly once the correct collet is seated. The kit suits muffler swaps, resonator replacements and custom builds where each new section must slip over the last, and it makes the expanded, seal-ready ends those joints depend on.

Specs

    • Brand: AP Astro Pneumatic Tool Company
    • Model number: 78835
    • Drive: 28 mm bolt head, impact driven
    • Expansion range: 1-5/8 in to 4-1/4 in
    • Collets included: steel expander collets for 1-5/8 to 2 in, 2 to 2-1/2 in, 2-3/8 to 2-3/4 in, 2-3/4 to 3-1/8 in, 3-1/8 to 3-1/2 in, 3-1/2 to 3-7/8 in, and 3-7/8 to 4-1/4 in
    • Collet length: 2 in
    • Material: alloy steel
    • Finish: metallic
    • Also included: thread grease and a molded carrying case
    • Item weight: 10.4 lb
    • Package dimensions: 15.35 x 11.22 x 3.54 in
    • Recommended impact wrench: rated for 800 ft-lbs tightening and above

    Best for: Slip-fit exhaust work on mild steel pipe, from muffler swaps to custom systems, in shops and home garages that already own a full-size impact wrench.
    Watch out for: The 28 mm drive socket is not included, the listing recommends an impact wrench rated at 800 ft-lbs tightening or above for most jobs, and the threads must be greased before use.
    ASIN: B01JBICBJ4

    Which One Fits Your Situation

    A Muffler Swap in Your Own Driveway

    If a new muffler inlet will not quite slip over the existing pipe, the 78835 is the tool that finishes the job without a trip to an exhaust shop. Pick the collet that matches your pipe, grease the threads, and expand the muffler inlet in small steps until it slides on and clamps down into a seal. The kit earns its shelf space the second time a replacement section arrives slightly undersized, which happens often enough with universal mufflers.

    Building a Custom System Section by Section

    Custom exhaust work is a chain of slip joints, and each joint needs one end expanded cleanly and round. The collet spread on this kit, running from 1-5/8 in to 4-1/4 in, means the same tool follows you from a compact build to a truck system without a second purchase. Because the drive is an impact head rather than a hand screw, repeated expansions across a long build stay quick, and the molded case keeps seven collets together between sessions.

    A Small Shop That Joins Pipes Every Week

    For a shop, the question is speed and coverage rather than any single job. The 78835 covers the diameters that roll in most often, the steel collets are individual pieces that can be swapped in seconds, and the kit weighs 10.4 lb in its case, so it moves between bays. Pair it with the full-size impact wrench the listing calls for and a technician can size a joint, expand it and hang the section in one pass under the car.

    An Older Vehicle With Sound, Straight Pipe Ends

    Age alone does not disqualify a pipe from stretching. If the ends on an older car or truck are straight, round and still full thickness, this kit can expand them for a fresh slip joint and save the rest of a system that has years left in it. Inspect first: wire-brush the end, check for thin spots and cracks, and only stretch metal that is genuinely sound. Rusted or flaking ends belong in the scrap bin, not under a collet.

    Common Mistakes

    • Running the tool dry: the listing says to apply the included grease to the threads before use, and skipping it galling the drive threads is how these tools wear out early.
    • Driving it with an undersized impact wrench: a compact impact that cannot reach the recommended tightening figure will stall on larger pipe and leave a half-expanded, out-of-round end.
    • Stretching pipe the kit is not specified for: it is described for mild steel exhaust pipe, so forcing stainless or heavy-wall tubing risks splitting the pipe or damaging the collets.
    • Expanding too far in one pass: overshooting the slip fit leaves a loose joint that no clamp can seal properly, so work up to the size in small steps and test-fit as you go.
    • Expecting it to fix damage: a stretcher cannot repair a bent, cracked or rusted-through section, and trying to expand bad metal usually finishes the split it started with.

    Frequently Asked Questions

    What pipe sizes does the Astro 78835 cover?

    The kit expands pipe from 1-5/8 in to 4-1/4 in. Seven steel collets divide that span into overlapping ranges, starting at 1-5/8 to 2 in and ending at 3-7/8 to 4-1/4 in, and each collet measures 2 in in length. Measure your pipe’s outside diameter first and match it to the collet list before ordering.

    What impact wrench does this kit need?

    The listing recommends an impact wrench rated for 800 ft-lbs of tightening torque and above to do most jobs, driving the tool through its 28 mm bolt head. That 28 mm socket is not included with the kit, so confirm you own one or add it to the same order. Smaller pipes near the bottom of the range ask less of the wrench than the largest sizes do.

    Can it stretch stainless steel exhaust pipe?

    The kit is specified for mild steel exhaust pipe: the manufacturer describes it as a tool for expanding mild steel piping to make exhaust seals, and the listing states no stainless capability. Stainless tubing resists expansion and work-hardens as it moves, so a stainless system calls for confirming the approach with the pipe supplier rather than assuming this kit will handle it the same way.

    What comes in the box with the 78835?

    The kit includes the impact-driven expander tool with its 28 mm drive head, the seven steel collets covering 1-5/8 in to 4-1/4 in, grease for the threads, and a molded carrying case that holds the set together. The whole package weighs 10.4 lb. What is not in the box is the 28 mm socket and the impact wrench itself, both of which the job requires.

    M
    Mike Sullivan
    We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

    FAQ

    What pipe sizes does the Astro 78835 cover?
    The kit expands pipe from 1-5/8 in to 4-1/4 in. Seven steel collets divide that span into overlapping ranges, starting at 1-5/8 to 2 in and ending at 3-7/8 to 4-1/4 in, and each collet measures 2 in in length. Measure your pipe’s outside diameter first and match it to the collet list before ordering.
    What impact wrench does this kit need?
    The listing recommends an impact wrench rated for 800 ft-lbs of tightening torque and above to do most jobs, driving the tool through its 28 mm bolt head. That 28 mm socket is not included with the kit, so confirm you own one or add it to the same order. Smaller pipes near the bottom of the range ask less of the wrench than the largest sizes do.
    Can it stretch stainless steel exhaust pipe?
    The kit is specified for mild steel exhaust pipe: the manufacturer describes it as a tool for expanding mild steel piping to make exhaust seals, and the listing states no stainless capability. Stainless tubing resists expansion and work-hardens as it moves, so a stainless system calls for confirming the approach with the pipe supplier rather than assuming this kit will handle it the same way.
    What comes in the box with the 78835?
    The kit includes the impact-driven expander tool with its 28 mm drive head, the seven steel collets covering 1-5/8 in to 4-1/4 in, grease for the threads, and a molded carrying case that holds the set together. The whole package weighs 10.4 lb. What is not in the box is the 28 mm socket and the impact wrench itself, both of which the job requires.
    Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
    Astro Pneumatic Exhaust Pipe Stretcher Kit (November 2026)Check price on Amazon

    More from Amazon

    Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

    Amazon Prime

    Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

    Start a Prime free trial
    Prime for Young Adults

    A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

    See Prime for Young Adults
    Audible

    Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

    Try Audible free
    Amazon Music Unlimited

    Ad-free music streaming. Eligible new subscribers can start with a free trial.

    Try Music Unlimited free

    As an Amazon Associate we earn from qualifying purchases.