Key takeaways
- Compare the best mountain bike spokes for repairs and rebuilds, with J-bend and heavy-gauge steel packs, listed lengths, gauges and nipple details inside.
A broken spoke rarely ends a ride on the spot, but it ends the wheel’s good behaviour. The rim pulls toward the intact side, the brake rotor can rub, and every remaining spoke carries load it was never meant to hold alone. Replacing spokes is a satisfying repair because the parts are simple and a correct replacement restores the wheel completely. The catch is that spokes are not universal. Length, bend type, gauge and thread all have to match the wheel you already own.
This guide covers replacement spoke packs for mountain bike wheels, from a mainstream 14-gauge J-bend set with brass nipples to heavy 12-gauge packs built for loaded and electric bikes. Every pick is a spoke pack only, not a complete wheel, and every specification comes from the product listing itself. Read the buying guide first, measure your existing spokes, and only then choose a pack.
As an Amazon Associate, I earn from qualifying purchases.
When a Spoke Needs Replacing
Spokes usually fail at the elbow, where the spoke bends through the hub flange, or at the thread where it meets the nipple. Rock strikes, a stick through the wheel, a dropped chain and plain fatigue are the usual causes. One broken spoke is a repair. Several, or spokes that keep snapping on the same wheel, point to uneven tension across the build, and replacing the full set on that wheel is often the smarter job.
Before ordering, remove one intact spoke from the same side of the same wheel and measure it. Front and rear wheels often use different lengths, and the two sides of a rear wheel commonly differ by a couple of millimetres because of hub dish.
Length Comes First
Spoke length is measured in millimetres and is the single most important number in this guide. Too short, and the thread does not engage enough of the nipple, leaving a weak joint. Too long, and the spoke can poke through the rim tape and puncture the tube or damage a tubeless setup. Most listings state length without the elbow, and several packs below are sold in a chosen length, so the size selector number is the number you are buying.
Older 26-inch wheels often use spokes in the mid-250s to mid-260s, 27.5-inch wheels commonly sit in the 260s and 270s, and 29-inch wheels frequently need lengths in the 280s and 290s, depending on hub, rim and lacing. Never guess from wheel diameter alone.
J-Bend or Straight-Pull
Most mountain bike hubs use J-bend spokes. The head has a hooked elbow that seats in a hole in the hub flange, a design standard for decades, which is why nearly every pack here uses it. Straight-pull spokes have no elbow; the head is a straight, widened end that slots into a specific hub shell. They only fit hubs built for them.
Look at the spoke you removed. If it has a bent elbow, buy J-bend. If it pulls straight out of a shaped pocket in the hub, buy the straight-pull pattern for that hub. The two types are never interchangeable.
Plain Gauge, Butted and Heavy Gauge
A plain-gauge spoke keeps one diameter from elbow to thread. A 14-gauge spoke is 2.0 mm along its whole length, which makes it simple, strong and easy to tension evenly. Butted spokes are thinner in the middle and thicker at the ends, where stress concentrates. They save a little weight, but listings in this category are dominated by plain-gauge steel, and the picks below reflect that.
Gauge runs backwards: the lower the number, the thicker the spoke. Standard mountain bike wheels use 14-gauge spokes. The 12-gauge packs below are 2.5 mm thick and are aimed at electric bikes and heavy-duty wheels. A 12-gauge spoke needs a hub flange and rim drilled for it and a matching nipple, so treat those packs as a separate system, not a thicker drop-in.
Materials and Nipples
Stainless steel is the preferred spoke material because it resists corrosion over years of wet riding. Plain steel spokes cost less and work fine, but their finish matters more in mud and winter salt. Each product section below repeats only what its listing claims.
Nipples matter as much as spokes. Brass nipples resist seizing and rounding, which is why wheel builders favour them. Some packs include nipples and some do not, and the thread gauge must match the spoke. Each Specs list states the pack count and whether nipples are included.
The Five Replacement Packs
1. GATWOEST 36 Pcs 14G J Bend Bicycle Spokes
This is the most direct match for a standard mountain bike wheel in the group. The listing describes a 36-piece set of 14-gauge J-bend spokes in black steel, sold with 36 brass nipples, and names mountain bikes, electric bikes, road and city bikes and 700C wheels among its uses. The size shown on the listing is 237 mm.
Brass nipples are the detail that lifts this pack. They tolerate repeated truing better than basic alloy nipples and are less likely to seize in the rim. Because the listing is sold by length, confirm the size selector shows the length you measured. For a conventional 14-gauge J-bend wheel, this is the natural first place to look.
Specs
- Gauge: 14G (2.0 mm)
- Bend: J-bend
- Material: Steel, black finish
- Length: 237 mm size shown on the listing; sold by length
- Pack count: 36 spokes
- Nipples: 36 brass nipples stated in the listing title
- Model: SH150-309
2. A ABSOPRO 14 G Steel Bike Spokes, 260 mm, Pack of 36
The ABSOPRO pack is the fixed-length option. The listing record gives a full set of measurements: 36 steel spokes at 260 mm long without the elbow, a 2 mm shaft diameter that matches the 14-gauge label, a 4 mm elbow head diameter and an M2x0.45 thread. The record describes the pack as designed for mountain bikes.
A stated 260 mm length suits many 26-inch mountain bike wheels and some compact 27.5-inch builds, but measure first. The listing data lists the 36 spokes themselves, without naming nipples in the pack contents, so plan on reusing sound nipples or ordering a matching 14-gauge set separately. For riders whose wheel genuinely takes a 260 mm plain-gauge spoke, the appeal is the complete, clearly dimensioned specification.
Specs
- Gauge: 14G (2.0 mm shaft diameter)
- Bend: J-bend pattern with 4 mm elbow head
- Material: Steel, black finish
- Length: 260 mm without elbow
- Thread: M2x0.45
- Pack count: 36 spokes
- Nipples: Not listed in the pack contents shown
3. Kingstar 12 Gauge 304 Stainless Steel Spokes, Bag of 36
This pack changes two variables at once: material and gauge. The listing states 304 stainless steel, a silver finish and a bag of 36 spokes with nipples included, under the model name KS-12 from the maker Kingstar-cn. The size shown is 202 mm. The title positions the pack for electric bicycles, which is where a 12-gauge stainless spoke belongs: motor torque and battery weight punish spokes, and stainless resists corrosion.
Treat this as a heavy-duty system rather than a like-for-like swap. A 2.5 mm spoke needs hub flange and rim holes that accept it, plus the matching nipples the pack provides. On a standard 14-gauge trail wheel it will not fit. On a hub-motor or cargo wheel built for thick spokes, stainless is the strongest material claim in this guide.
Specs
- Gauge: 12G (2.5 mm)
- Material: 304 stainless steel
- Colour: Silver
- Length: 202 mm size shown on the listing
- Pack count: 36 spokes
- Nipples: Included, per the listing title and contents field
- Model: KS-12
4. goucrro Bike Spokes 12G, 20 Pieces with Nipples
The goucrro listing covers the widest length span in this guide. Its title gives 12-gauge spokes of 2.5 mm in number 45 steel, in lengths from 131 mm to 298 mm, packed as 20 pieces with nipples, and the listing copy highlights a thickened elbow. That upper length reaches into full-size mountain bike territory, and the 20-piece count suits repairing one wheel rather than a full rebuild.
The same 12-gauge cautions apply: confirm your hub and rim are drilled for 2.5 mm spokes, and choose the exact length in the size selector, because the range includes sizes that fit nothing on a mountain bike. The thickened elbow addresses the point where spokes most often fail.
Specs
- Gauge: 12G (2.5 mm)
- Material: Number 45 steel, black finish
- Length: 131 mm to 298 mm range in the listing title; select your size
- Pack count: 20 spokes
- Nipples: Included, per the listing title
- Part number: BSS-12G-FU
5. SENQI Bicycle Spokes, 36 Pieces with Copper Caps
The SENQI listing is the broad-range steel option. The title describes spokes in steel and stainless steel, sold as 36 pieces with copper caps, in lengths from 80 mm to 297 mm, and the listing data shows a black finish with model number U-BZN-BK-160 for the 160 mm variant. The top of that range covers the sizes most 27.5-inch and 29-inch wheels need.
Copper caps are this listing’s word for its nipples, and they are part of the pack rather than an extra purchase. As with every range listing, the variant you select is the product you receive, so set the length deliberately. The title adds stainless steel while the listing data states steel, so expect a working steel spoke rather than a premium stainless build.
Specs
- Gauge: Not stated as a gauge number in the listing data seen
- Material: Steel / stainless steel, per the listing title; steel in the listing data
- Colour: Black
- Length: 80 mm to 297 mm range in the listing title; select your size
- Pack count: 36 spokes
- Nipples: Copper caps included, per the listing title
- Model: U-BZN-BK-160
Key Factors Before You Order
Measure a spoke from the wheel and side you are repairing, and write the number down before browsing. Confirm the bend type by looking at the removed spoke. Match the gauge to the nipples and hub flange holes you already have, unless you are deliberately rebuilding around a heavy-gauge system. Check whether the pack includes nipples. Finally, plan the tensioning: a replaced spoke must be brought up to even tension and the wheel trued, or the repair will not last.
Frequently Asked Questions
How do I measure a mountain bike spoke?
Remove one unbroken spoke from the same side of the same wheel and measure its full length in millimetres, following the listing convention of length without the elbow where stated. If every spoke on that side is damaged, ask a shop to calculate the length from the hub and rim. Never order from wheel diameter alone.
Can I fit 12-gauge spokes to a normal trail wheel?
Usually not as a simple swap. A 12-gauge spoke is 2.5 mm thick, so the hub flange holes, rim holes and nipples must all be sized for it. Standard trail wheels are built around 14-gauge spokes. The thick-gauge packs here suit electric and heavy-duty wheels designed for them.
Should I replace one spoke or the whole set?
One spoke is enough when a single impact caused the failure and the rest of the wheel is evenly tensioned and true. Replace the set on that wheel when spokes break repeatedly, when many feel uneven in tension, or when corrosion has reached the threads. Repeated failures are a tension problem that new spokes alone will not fix.
Do these packs include nipples?
Some do and some do not, and each Specs list above states what its listing says. The GATWOEST, Kingstar, goucrro and SENQI packs state nipples or caps are included, while the ABSOPRO listing data shows the 36 spokes without naming nipples. Reusing existing nipples only makes sense when they are undamaged and the same gauge as the new spokes.
Conclusion
The best mountain bike spokes are the ones that match your wheel exactly. For a standard 14-gauge J-bend wheel, the GATWOEST pack pairs a full 36-spoke set with brass nipples, and the ABSOPRO pack suits riders who need a 260 mm plain-gauge spoke. Heavier wheels built for thick spokes have their own options in the stainless Kingstar set, the wide-range goucrro pack and the broad-length SENQI set. Measure carefully, match the bend and gauge, and tension the wheel evenly.
FAQ
How do I measure a mountain bike spoke?
Can I fit 12-gauge spokes to a normal trail wheel?
Should I replace one spoke or the whole set?
Do these packs include nipples?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




