Key takeaways
- Compare the best license plate frames by material, rattle control and tag visibility, with silicone, stainless steel and carbon fiber picks for cars.
A bare license plate buzzes against the bumper, scratches paint, and rusts at the edges. The right frame fixes all three problems while keeping every letter, number, and registration sticker fully visible. The best license plate frames for most drivers are flexible silicone sleeves that cushion the plate and never corrode, while drivers who want a sharper look can step up to polished stainless steel or genuine carbon fiber. Below are five frames that fit standard United States plates, install with basic hand tools, and stay legal by leaving the plate’s identifying information uncovered.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most cars and trucks, the Aujen Silicone License Plate Frames are the best pick: the soft two-pack sleeves stop rattles, protect paint, and cannot rust. Drivers who prefer metal should choose the DFDM National stainless steel kit for its polished finish and included hardware, while the XCLPF silicone two-pack covers the budget tier.
The 5 Best License Plate Frames
1. Aujen Silicone License Plate Frames, Black, 2 Pack
The Aujen frame is a full silicone sleeve rather than a thin border, so the plate slides into a soft pocket that wraps its edges on all four sides. That design is why it leads this list: silicone cannot rust, it flexes instead of cracking in cold weather, and the cushion of material between plate and bumper ends the buzzing that thin metal frames often cause at highway speed. Drainage holes along the bottom edge let wash water and rain escape instead of pooling behind the plate, which helps keep the plate face cleaner between washes. Because the sleeve covers only the plate’s outer rim, state names, numbers, and corner registration stickers stay exposed and readable.
Specs:
- Material: Industrial-grade silicone
- Pack size: 2 frames (front and rear)
- Model: US518
- Fit: Standard US plates, 12 x 6 inches
- Frame dimensions: About 12.6 x 6.3 inches
- Finish: Matte black
- Drainage: Bottom drainage holes to shed water
- Hardware: Uses the vehicle’s existing plate screws
2. DFDM National Stainless Steel License Plate Frame Kit
Drivers who want a bright, finished look should look at the DFDM National kit. The frame is machined from SAE 304 stainless steel — the same grade used in performance exhaust systems — and hand polished to a mirror finish, so it will not rust, flake, or corrode the way chrome-plated plastic and mild steel frames do. It is a four-hole frame, which holds the plate flat and secure at all four corners on vehicles that have four mounting points. The kit includes stainless steel screws and matching screw caps in both US and import thread styles, so there is no separate hardware run before installation. The slim border is cut so registration tags in the corners remain visible.
Specs:
- Material: SAE 304 stainless steel
- Finish: Mirror polished
- Mounting: 4-hole design
- Pack size: 1 frame
- Included hardware: Stainless steel screws and screw caps (US and import styles)
- Fit: Standard US plates, 12 x 6 inches
- Corrosion resistance: Will not rust or corrode
- Border style: Slim, leaves corner tags visible
3. BLVD-LPF Genuine Carbon Fiber License Plate Frame
The BLVD-LPF frame is the style pick of this group. It is molded from genuine carbon fiber rather than a carbon-look printed plastic, and the glossy weave is sealed under a UV-protective clear coat so the finish resists fading in direct sun. Carbon fiber is rigid and light, and it will never rust, which makes this frame a good match for performance cars and for drivers in coastal areas where metal frames pit. The frame ships with fasteners and screws in the box. Because it is a single frame rather than a pair, most owners fit it to the rear plate, where frames get the most visual attention, and it is also a common choice for front plates on cars with a factory front bracket.
Specs:
- Material: Genuine carbon fiber
- Finish: Glossy with UV-protective clear coat
- Pack size: 1 frame
- Manufacturer: Boulevard Los Angeles Inc.
- Part number: LF6-D4P-E7A-PRNT
- Fit: Standard US, Canadian, and Mexican plates
- Included hardware: Fasteners and screws
- Weather resistance: Built for car washes and outdoor exposure
4. Bell Automotive License Plate Frame and Clear Cover Combo
Bell Automotive’s combo pairs a black frame with a clear protective cover, giving the plate a shield against stone chips, road salt, and pressure-washer spray. The frame is molded from high-impact plastic, so it is light, corrosion-proof, and flexible enough to follow slightly curved bumpers without cracking. This is the only pick here with a full-face cover, which is also its main caveat: some states and cities restrict or prohibit plate covers even when they are clear, so check local rules before fitting the cover, or use the frame on its own where covers are not allowed. The combo fits any standard-size plate or front decor plate and installs with the plate’s existing screws.
Specs:
- Material: High-impact plastic frame with clear cover
- Model: 22-1-45601-8
- Pack size: 1 frame and cover combo
- Fit: Standard US plates, 12 x 6 inches
- Finish: Black frame, clear cover
- Corrosion resistance: Plastic construction cannot rust
- Mounting: Uses existing plate screws
- Note: Check local laws before using the cover
5. XCLPF Silicone License Plate Frame Covers, 2 Pack
The XCLPF two-pack covers the budget tier with the same basic formula as the Aujen: a soft silicone body that wraps the plate, absorbs vibration, and cannot rust or scratch paint. Two frames are included, so front and rear plates are handled in one purchase, and the flexible material makes installation simple because the frame stretches over the plate corners instead of clipping on. The silicone stands up to sun, rain, snow, and car-wash brushes without fading or getting brittle, and the black finish keeps the look understated. For a second car, a work truck, or a new driver, this is the sensible low-cost way to quiet a rattling plate and protect the surrounding paint.
Specs:
- Material: Silicone
- Pack size: 2 frames (front and rear)
- Color: Black
- Fit: Standard US plates, 12 x 6 inches
- Design: Wrap-around cushioning to prevent rattles
- Weather resistance: Rust-proof and weather-proof construction
- Finish: Matte black
- Hardware: Uses the vehicle’s existing plate screws
How to Choose
Start with material, because it decides how a frame ages. Silicone is the practical default: it never rusts, it cushions the plate so it cannot buzz or wear through paint, and it stays flexible in winter. Stainless steel looks sharper and lasts for years, but only higher grades such as 304 resist corrosion well; uncoated steel and chrome-plated plastic eventually pit and flake. Carbon fiber suits drivers who care about appearance and weight, while basic plastic frames are the cheapest route and work fine on a second vehicle.
Next, confirm fit and legality. Every pick here suits the standard US plate size of 12 x 6 inches, but frames differ in how much of the plate border they cover. Most states require the state name, plate numbers, and registration stickers to remain fully visible, and wide frames can cover corner stickers on some plate designs. Slim borders and open-corner designs are the safe choice. Full-face covers, including clear ones, are restricted in a number of states, so treat the Bell combo’s cover as optional equipment and verify your local rules first.
Finally, check mounting. Four-hole frames hold the plate flattest and are best for vehicles with four threaded mounting points; two-hole frames and silicone sleeves work everywhere and install fastest. If your current plate screws are rusty, a kit with stainless hardware, like the DFDM National set, saves the frame from being stained by corroding screw heads later.
Who Should Skip
Skip a frame entirely if your state or province prohibits anything over the plate, including borders — a few jurisdictions are strict about frames that touch the plate’s characters. Skip full-face covers if you drive in a state that bans plate covers, and skip tinted or reflective covers everywhere, since they are illegal in most places and none are recommended here. Drivers with a powered or framed factory plate bracket, a bike rack that already covers the rear plate, or a plate mounted inside a recessed bumper pocket may also find an aftermarket frame does not sit flat. And if your plate itself is bent, peeling, or delaminating, replace the plate first; no frame fixes a plate that is already failing.
Frequently Asked Questions
Are license plate frames legal in every state?
Frames are legal in most states as long as they do not cover the plate number, the state name, or the registration stickers. Rules vary, and a few states restrict frames and covers more tightly, so check your state motor vehicle code before installing any frame or cover.
Do silicone license plate frames really stop rattling?
Yes, cushioning is the main reason silicone frames exist. The soft sleeve wraps the plate edges and fills the gap between plate and bumper, so the plate cannot vibrate against the bodywork. Metal frames can also rattle less when they use four mounting holes and are tightened evenly.
Will these frames fit my car or truck?
All five picks fit the standard US plate size of 12 x 6 inches used on cars, trucks, and SUVs in every state. Vehicles with only two top mounting holes should choose a two-hole frame or a silicone sleeve, while four-hole frames need four mounting points to sit flat.
Can a license plate frame cover my registration stickers?
It should not. Registration stickers sit in the plate corners in most states, and covering them can draw a ticket. Choose a slim-border frame or a silicone sleeve, and after installation confirm that both stickers and the full plate number are visible from behind the vehicle.
Final Verdict
The Aujen Silicone License Plate Frames are the best choice for most drivers: the two-pack sleeves end rattles, protect paint, shed water, and can never rust. Pick the DFDM National kit if you want polished stainless steel with hardware included, the BLVD-LPF frame for a genuine carbon fiber look, the Bell combo if your state allows a clear cover, and the XCLPF two-pack when the budget matters most. Whichever you choose, keep the stickers and numbers uncovered and the install takes only a few minutes.
FAQ
Are license plate frames legal in every state?
Do silicone license plate frames really stop rattling?
Will these frames fit my car or truck?
Can a license plate frame cover my registration stickers?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.