Updated Nov 19, 2026· 7 min read

Key takeaways

  • Compare the best headrest tablet mounts for backseat viewing, with fit ranges, mounting styles and rotation checked against published specs.

A tablet balanced on a child’s lap slides to the floor at the first firm stop, and a phone held at arm’s length for three hours is nobody’s idea of a road trip upgrade. A headrest tablet mount fixes the screen at eye level on the back of the front seat, keeps little hands free for snacks and books, and stays put over speed bumps. The five mounts below cover the main designs sold for back seats: clamp-and-arm models that grip the headrest posts, stretchable spring holders, and flat-packing strap mounts with silicone nets. Each one was chosen from published manufacturer specifications, with the device size range, mounting method and adjustment style checked model by model so you can match a mount to your tablet and your car’s headrest posts before ordering.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For most back seats, the Lamicall 3-in-1 extension arm mount is the easiest recommendation because it centers the screen between two seats and fits devices from 4.7 to 11 inches. The Tryone stretchable mount is the budget alternative, the Macally HRMOUNTPRO suits larger 12.9-inch tablets, and the FANGOR and WONNIE strap mounts pack flat for travel.

Lamicall Car Headrest Tablet Holder With 3-in-1 Extension Arm

The Lamicall CH06 is the pick for families who carry one tablet for two backseat viewers. Instead of clamping the screen directly behind a single headrest, its 3-in-1 extension arm reaches inward so the tablet sits closer to the center of the bench, where both passengers can see it without leaning. The holder grips the metal headrest posts, adjusts for viewing angle, and folds back toward the seat when nobody is watching. The device range runs from 4.7 to 11 inches, which covers phones, small tablets and standard iPads, although the largest 12.9-inch Pro models sit outside its stated range. For a single shared screen on long drives, this is the most flexible layout of the five.

Specs:

  • Model: CH06-US-B
  • Device fit: 4.7 to 11 inches
  • Mounting: clamps to headrest posts, 3-in-1 extension arm
  • Adjustment: multi-angle arm, folds toward the seat
  • Tier: mid-range

Tryone Car Headrest Tablet Mount Holder, Stretchable Design

The Tryone UK-66 takes the simplest mechanical approach in this group: a spring-loaded, stretchable frame that pulls apart, accepts the device, and clamps down with padded contact points. There is no arm to position and no strap to thread, so swapping between a phone and a tablet takes seconds, which makes it a sensible second mount for a grandparents’ car or a rental. The stated fit range is the joint widest here, running from 4.7-inch phones up to 12.9-inch tablets, and the holder rotates so a movie can play in landscape while a reading app can switch to portrait. What you give up is reach: the screen sits close to the seat back, fixed behind one headrest rather than centered.

Specs:

  • Model: UK-66
  • Device fit: 4.7 to 12.9 inches
  • Mounting: spring-loaded stretchable clamp on headrest posts
  • Adjustment: 360-degree rotation for portrait or landscape viewing
  • Tier: budget

Macally HRMOUNTPRO Car Headrest Tablet Holder

Check price on Amazon

Macally has sold car mounts longer than most brands in this category, and the HRMOUNTPRO is its structured, premium-feeling option. The cradle fits devices from 4.7 to 12.9 inches, so it handles everything from a phone to the biggest iPad Pro, and the mount body is a substantial piece of hardware at 4.25 by 8 by 11 inches rather than a featherweight clip. That size buys a firmer hold on rough roads, which matters when the tablet is heavy. The design positions the screen directly behind the headrest with tilt adjustment for glare. Drivers who run one large tablet as the permanent backseat screen, and who value a long-established accessories brand with a stable model line, are the natural audience.

Specs:

  • Model: HRMOUNTPRO
  • Device fit: 4.7 to 12.9 inches
  • Mounting: bracket on headrest posts
  • Dimensions: 4.25 x 8 x 11 inches
  • Manufacturer: Mace Group Inc (Macally Peripherals)
  • Tier: premium

FANGOR Car Headrest Mount Holder With Holding Net

The FANGOR FG-12345 skips rigid clamps entirely. An adjustable strap wraps the headrest itself, and an elastic silicone holding net stretches over the corners of the tablet, a layout that tolerates thick protective cases better than narrow spring jaws do. It fits tablets from 7 to 12.9 inches and allows angle adjustment once strapped in. Because nothing depends on exposed metal posts, this is the design to look at for seats with integrated or single-piece headrests where post-clamp mounts cannot attach. It also removes in seconds and rolls up small, so it moves easily between cars. The trade-off is ultimate rigidity: a net holds firmly, but a heavy tablet on a corrugated gravel road will move more than it would in the Macally cradle.

Specs:

  • Model: FG-12345
  • Device fit: 7 to 12.9 inches
  • Mounting: adjustable strap around the headrest, silicone holding net
  • Adjustment: angle-adjustable once mounted
  • Tier: mid-range

WONNIE Tablet Holder for Car Headrest

Check price on Amazon

The WONNIE mount uses the same strap-and-net idea as the FANGOR, executed as a lightweight travel accessory from a brand better known for portable DVD players and kids’ travel gear. Its anti-slip strap fastens around the headrest and the silicone net grips tablets from 7 to 12.9 inches, including cased devices that defeat slim clamps. Installation needs no tools and no access to headrest posts, and the whole holder packs nearly flat in a carry-on, which makes it the natural choice for fly-and-drive holidays where the mount travels in luggage and the car is a rental. Like the FANGOR, it trades a little rigidity for that portability, and phones are below its stated size range, so it is a tablet-only solution.

Specs:

  • Model: WONNIE Tablet Holder for Car
  • Device fit: 7 to 12.9 inches
  • Mounting: anti-slip strap on headrest, silicone holding net
  • Adjustment: tilt adjustment via strap position
  • Tier: budget

How to Choose a Headrest Tablet Mount

Start with the headrest itself. Post-clamp mounts such as the Lamicall, Tryone and Macally need two exposed metal posts with enough clearance to grip, so check your seat before ordering; some trims hide the posts inside the seat shell. Strap mounts such as the FANGOR and WONNIE wrap the headrest body and work on far more seats, including many integrated designs. Next, match the device range honestly. A mount rated to 11 inches will not safely hold a 12.9-inch tablet, and a net mount rated from 7 inches cannot grip a phone. Consider who is watching: an extension arm centers one screen for two children, while a fixed mount behind each headrest gives every passenger their own. Finally, think about cases. Bulky kids’ bumper cases add width and weight, and net-style holders usually swallow them more easily than spring clamps with shallow jaws.

Who Should Skip a Headrest Tablet Mount

Skip this category if your car has fixed, one-piece sport seats with no separate headrest, since neither post clamps nor straps have anything to hold. Drivers of cars with active head restraints that move forward in a crash should also check the vehicle manual before clamping hardware to the posts. If the only screen in the car is a phone, a smaller phone-specific mount will be cheaper and tidier than a tablet holder used at the bottom of its range. And if backseat passengers mostly listen rather than watch, a simple headrest hook for headphones and bags solves the actual problem for less money and zero setup.

Frequently Asked Questions

Will a headrest tablet mount fit my car?

Most will, provided the front seats have adjustable headrests. Clamp models need exposed metal posts, while strap models wrap the headrest itself and fit a wider range of seats, including many one-piece designs. Measure your post spacing and headrest width against the mount’s published fit notes before ordering.

Can these mounts hold a tablet in a thick kids’ case?

Net-style mounts from FANGOR and WONNIE stretch over the corners of a cased tablet and are usually the easiest fit for bulky bumper cases. Spring-clamp models vary: check the jaw depth in the specifications, because a deep case can exceed the grip even when the screen size is within range.

Is it safe to leave a tablet mounted on the headrest?

A correctly installed mount holds the tablet firmly for normal driving, and keeping the screen secured is safer than a loose device sliding around the cabin. Remove the tablet when parked in hot weather to protect its battery, and make sure clamps are fully tightened before long trips.

Can two children share one mounted tablet?

Yes, and an extension-arm mount such as the Lamicall CH06 is designed for exactly that, sliding the screen toward the middle of the bench so both passengers get a usable viewing angle. For three children across the bench, two fixed mounts usually work better than one shared screen.

Final Verdict

Most families should start with the Lamicall CH06: the extension arm solves the shared-screen problem that fixed mounts ignore, and its 4.7 to 11 inch range covers the tablets children actually use. Choose the Tryone UK-66 for the widest fit at a budget tier, the Macally HRMOUNTPRO for a large tablet and a firmer cradle, and either strap mount, FANGOR or WONNIE, when your headrests have no exposed posts or the mount needs to travel in a suitcase.

Check price on Amazon

Check price on Amazon

M
Mike Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Will a headrest tablet mount fit my car?
Most will, provided the front seats have adjustable headrests. Clamp models need exposed metal posts, while strap models wrap the headrest itself and fit a wider range of seats, including many one-piece designs. Measure your post spacing and headrest width against the mount’s published fit notes before ordering.
Can these mounts hold a tablet in a thick kids’ case?
Net-style mounts from FANGOR and WONNIE stretch over the corners of a cased tablet and are usually the easiest fit for bulky bumper cases. Spring-clamp models vary: check the jaw depth in the specifications, because a deep case can exceed the grip even when the screen size is within range.
Is it safe to leave a tablet mounted on the headrest?
A correctly installed mount holds the tablet firmly for normal driving, and keeping the screen secured is safer than a loose device sliding around the cabin. Remove the tablet when parked in hot weather to protect its battery, and make sure clamps are fully tightened before long trips.
Can two children share one mounted tablet?
Yes, and an extension-arm mount such as the Lamicall CH06 is designed for exactly that, sliding the screen toward the middle of the bench so both passengers get a usable viewing angle. For three children across the bench, two fixed mounts usually work better than one shared screen.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Headrest Tablet Mounts: 5 Picks for Backseat…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.