Updated Nov 22, 2026· 9 min read

Key takeaways

  • Find the best bike grommet kits for workshop repairs, with solid brass grommets, hole punches and setting tools sized for tarps, covers and gear.

A torn eyelet on a tarp or bike cover usually fails at the worst moment: the cover lifts in a storm, a tie-down point rips out, or the bungee cord that keeps a stored bike dry pulls straight through the fabric. A grommet kit fixes that problem at the workbench. With a hole punch, a setting tool and a small stock of metal eyelets, you can replace a ripped grommet in minutes or add fresh tie-down points to a cover that never had enough of them.

The kits below cover the three ways grommets get set in a home workshop. Hammer-set kits pair a hole cutter with a mandrel and anvil, and they suit heavy tarp and canvas work. Plier-style kits squeeze the grommet closed by hand, which is faster on lighter fabric and easier to control on small eyelets. Every kit here includes its own setting tools, so nothing extra is needed beyond a hammer for the anvil-style sets or a firm work surface for the pliers.

As an Amazon Associate, I earn from qualifying purchases.

What to Look for in a Grommet Kit

Grommet size comes first. The measurement that matters is the inside diameter of the finished hole, because that is what your cord, hook or bungee passes through. A 1/4 inch eyelet suits light fabric, curtains and small gear bags. A 3/8 inch eyelet is the middle ground that handles most tarps and covers. A 1/2 inch eyelet gives the strongest tie-down point and matches the spacing found on many heavy tarps and awnings.

Material comes next. Solid brass grommets resist rust, which matters for covers that live outdoors or in a damp garage. Plated and painted metal eyelets cost less and come in more colors, but the coating can chip at the crimp and expose the metal underneath. For a bike cover that stays outside all winter, brass is the safer pick.

Finally, check what the kit actually includes. A complete kit pairs the grommets and washers with a hole punch and a setting tool, and better kits add a storage box so the small parts stay sorted. Piece counts vary widely: a small anvil kit may hold a dozen grommets for occasional repairs, while plier kits bundle several hundred eyelets for regular use.

Think about where the repairs happen, too. A hammer-set kit needs a bench, a mallet or hammer, and room to swing, so it belongs in the workshop. A plier kit works anywhere you can hold the fabric steady, including over a cover that is still fitted to the bike or a tarp that is still rigged. If most of your covers stay outdoors and repairs happen in place, the plier format earns its keep; if you batch repairs at the bench, the anvil format sets a stronger crimp in thick material.

1. General Tools 1260-4 Solid Brass Grommet Kit

General Tools builds this kit around the traditional hammer-and-anvil method, and it is the closest match to the grommets found on quality tarps. The grommets are solid brass rather than plated, so the finished eyelets shrug off rain and damp storage. The kit includes a hole cutter for punching a clean opening, a hardwood backer block that supports the fabric while you cut, and a hardened mandrel and anvil for rolling the grommet barrel over its washer.

The 1/2 inch size is the one to choose for tarp and cover repairs, since it matches the tie-down points on most heavy covers and accepts thicker cord. The setting tool has a knurled body for grip, and the tool and anvil are coded with lines for the grommet size. This is a repair kit rather than a bulk supply: it is sized for fixing torn eyelets and adding a few new anchor points, and refill packs of matching brass grommets keep it working for years.

Specs

    • Grommet size: 1/2 inch inside diameter
    • Grommet material: solid brass
    • Tools included: hole cutter, hardwood backer block, hardened mandrel and anvil
    • Model: 1260-4

    2. Cridoz 120 Sets Grommet Tool Kit, 1/2 Inch

    The Cridoz kit is a hammer-set kit built for volume. It packs 120 complete grommet sets, split evenly between silver and gold finishes, in a clear storage box with the setting tools alongside. The grommets are copper, with a 1/2 inch inside diameter and a 3/4 inch outside diameter, which gives the flange plenty of grip on tarp and canvas material.

    Because the box keeps the two colors separated, it suits workshops that repair both silver tarp material and darker covers where a gold or brass tone blends better. The included setting tools follow the punch, mandrel and anvil pattern, and an instruction sheet walks through the sequence. For a garage that maintains several covers, a trailer tarp and maybe a boat cover, the piece count here means one kit covers a long run of repairs before refills are needed.

    Specs

      • Grommet size: 1/2 inch (12.7 mm) inside diameter, 3/4 inch (19.05 mm) outside diameter
      • Piece count: 120 sets, 60 silver and 60 gold
      • Grommet material: copper
      • Tools included: setting tools with storage box
      • Part number: GMK-01
      • Item weight: 0.42 kg

      3. SBGGRL Grommet Tool Kit, 3/8 Inch

      SBGGRL takes the plier route. Instead of a hammer and anvil, a heavy-duty hand plier punches and sets each grommet in one squeeze, which speeds up work on long runs of eyelets and keeps the process quiet. The kit includes 300 grommets in the 3/8 inch (10 mm) size, divided between gold, black and silver finishes.

      The listing describes the grommets and tool as stainless steel, and the plier format handles tarps, fabric, leather, tents, vinyl and canvas. The 3/8 inch size is a practical middle ground: big enough for paracord and small bungees, small enough to sit neatly along a cover hem. With three colors in the box, repairs on black bike covers and dark tarps stay discreet, while the silver and gold pieces cover lighter materials.

      Specs

        • Grommet size: 3/8 inch (10 mm)
        • Piece count: 300 grommets
        • Colors: gold, black and silver
        • Tool type: handheld eyelet pliers, manual operation
        • Material: stainless steel

        4. PHIRAH Grommet Tool Kit, 3/8 Inch

        The PHIRAH kit is also plier-based, but it leans into convenience features. The pliers carry a magnetic seat that holds the grommet and washer in place while you position the fabric, so parts stop dropping onto the workshop floor. The handle uses an anti-slip, ergonomic shape designed for one-handed use, and the tool returns automatically after each press.

        Inside the tool bag are 500 brass grommets in the 3/8 inch (10 mm) size, the largest count among the plier kits here. Brass construction suits outdoor covers, and the listing notes that pre-punching is usually unnecessary because the plier cuts and sets in sequence, though very tough material can be punched first. The bag keeps the kit portable enough to live in a car boot or a bike trailer box for repairs away from home.

        Specs

          • Grommet size: 3/8 inch (10 mm)
          • Piece count: 500 grommets
          • Grommet material: brass
          • Tool type: handheld eyelet pliers with magnetic seat and anti-slip handle
          • Storage: tool bag included
          • Part number: JYQ-NH1004K-D

          5. Caffox 1203-Piece Grommet Eyelet Plier Kit, 1/4 Inch

          For smaller work, the Caffox kit drops to the 1/4 inch eyelet size used on light fabric, clothing, belts and gear bags. The count is generous: 600 metal eyelets and 600 matching washers, split between gold and silver, plus the plier, a separate hole punch and a user manual.

          The eyelets have a 1/4 inch inner diameter, a 1/2 inch outer diameter and a 1/4 inch barrel length. The pliers are carbon steel with a chrome-plated surface and PVC-dipped handles, and the workflow is simple: punch the hole with the included punch, seat the eyelet and washer in the plier jaws, and squeeze. This is the kit for adding eyelets to soft pannier fabric, repairing a shoe or belt, or putting a hanging hole in a light shop curtain rather than a heavy tarp.

          Specs

            • Grommet size: 1/4 inch inner diameter, 1/2 inch outer diameter, 1/4 inch barrel
            • Piece count: 600 eyelets and 600 washers, 1203 pieces total with tools
            • Colors: gold and silver
            • Tool type: eyelet pliers, carbon steel with chrome-plated surface and PVC-dipped handles
            • Also included: hole punch and user manual

            Matching the Kit to the Job

            For heavy tarps, trailer covers and awnings, start with a 1/2 inch hammer-set kit. The General Tools set is the traditional option, with solid brass grommets and a hardwood backer block, while the Cridoz kit trades the classic format for volume, with 120 sets in two finishes for workshops that repair several covers. Both set a deep, secure crimp that holds up when a cover is tensioned hard.

            For everyday cover and fabric work, the 3/8 inch plier kits are quicker. The SBGGRL kit covers three finishes in stainless steel, and the PHIRAH kit adds a magnetic seat, an automatic-return handle and a tool bag, with the largest grommet count of the group. Choose between them by material: stainless for mixed indoor and outdoor use, brass for covers that live outside.

            For light fabric, the Caffox kit in 1/4 inch is the right scale. Its eyelets are too small for tarp tie-downs, but they are exactly what belts, bags, curtains and soft gear need, and the big piece count means a repair habit never runs the box dry.

            Setting Grommets That Stay Put

            Most failed grommets trace back to the hole. Cut it cleanly with the punch sized to the grommet barrel; a ragged or oversized hole lets the barrel slip through under load. On thin fabric, fold a hem or add a patch of spare material behind the grommet so the crimp grips two layers instead of one.

            Work on a solid surface. Anvil kits need the backer block on a bench or floor that will not bounce, and each hammer strike should land squarely on the mandrel. With plier kits, keep the jaws perpendicular to the fabric and squeeze in one steady motion. After setting, tug the grommet firmly by hand. A well-set eyelet does not rotate or flex; if it does, set it again or replace it before the cover goes back outside.

            Frequently Asked Questions

            What size grommets fit a standard tarp or bike cover?

            Most tarps and covers use 3/8 inch or 1/2 inch grommets. The 1/2 inch size accepts thicker rope and bungee hooks and matches the spacing on heavy tarps, while 3/8 inch suits lighter covers. Measure the inside diameter of an existing eyelet before ordering refills.

            Do I need a hole punch, or can the setting tool cut the hole?

            Hammer-set kits need a separate hole cutter, which is included in the kits above along with a backer block. Plier kits often cut and set in one motion on light material, but tough canvas still benefits from pre-punching with the included punch for a cleaner hole.

            Are brass grommets better than plated steel ones for outdoor covers?

            For covers that live outdoors, yes. Solid brass does not rust, so the eyelet keeps its strength in rain and damp storage. Plated and painted grommets work well indoors and offer more colors, but a chipped coating can let the base metal corrode over time.

            Can a grommet kit repair a torn tie-down point on a bike cover?

            Yes, as long as enough sound fabric remains around the tear. Trim the damaged area, fold or patch the edge for a double layer, then punch and set a fresh grommet slightly inboard of the original position so the crimp grips undamaged material.

            M
            Mike Sullivan
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

            FAQ

            What size grommets fit a standard tarp or bike cover?
            Most tarps and covers use 3/8 inch or 1/2 inch grommets. The 1/2 inch size accepts thicker rope and bungee hooks and matches the spacing on heavy tarps, while 3/8 inch suits lighter covers. Measure the inside diameter of an existing eyelet before ordering refills.
            Do I need a hole punch, or can the setting tool cut the hole?
            Hammer-set kits need a separate hole cutter, which is included in the kits above along with a backer block. Plier kits often cut and set in one motion on light material, but tough canvas still benefits from pre-punching with the included punch for a cleaner hole.
            Are brass grommets better than plated steel ones for outdoor covers?
            For covers that live outdoors, yes. Solid brass does not rust, so the eyelet keeps its strength in rain and damp storage. Plated and painted grommets work well indoors and offer more colors, but a chipped coating can let the base metal corrode over time.
            Can a grommet kit repair a torn tie-down point on a bike cover?
            Yes, as long as enough sound fabric remains around the tear. Trim the damaged area, fold or patch the edge for a double layer, then punch and set a fresh grommet slightly inboard of the original position so the crimp grips undamaged material.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.