Updated Nov 21, 2026· 9 min read

Key takeaways

  • Compare the best bike fuse assortments for support cars: blade fuse kits in standard, mini, and low profile sizes with pullers for trailer wiring jobs.

The support car does a lot of quiet work in a riding household. It hauls bikes to trailheads, tows a small trailer, and feeds the 12-volt outlets that charge lights and pumps between stages. When one of its blade fuses lets go, the failure is rarely dramatic: a dead trailer light, a dark cargo lamp, a hitch-rack turn signal that stops blinking. The fix takes two minutes if the glove box holds the right assortment, and a long detour if it does not.

Our top pick: Eaton Bussmann NO.44 ATC Blade Fuse Kit, 42 Pieces. Runner-up: Nilight 50014R Low Profile Mini Blade Fuse Assortment, 140 Pieces.

As an Amazon Associate, I earn from qualifying purchases.

This guide covers automotive blade fuse assortment kits only: boxes of standard, mini, low profile mini, and micro blade fuses, in most cases with a puller or tester in the lid. It does not cover fuse boxes, fuse blocks, or add-a-circuit taps, which are wiring hardware rather than assortments. Every kit below was chosen on the fuse types it covers, the spread of amp values, and how the counts are distributed across those values.

What to look for in a fuse assortment kit

Start by matching the fuse type to the vehicle. Standard blade fuses, the ATC and ATO pattern, fill the fuse boxes of older cars and many trailers. Mini blade fuses, the ATM and APM pattern, are the common fit in newer vehicles. Low profile mini fuses sit in the same sockets as mini fuses but with a shorter body, and micro fuses appear in the newest fuse panels. A kit that mixes types only helps if your car and trailer actually use those types, so check the fuse box lid diagram or the owner manual first.

Next, look at the amp spread. Most circuits a support car protects, lighting, outlets, fans, wipers, and trailer feeds, fall between 5 and 30 amps, but a wide kit running from 2 to 40 amps covers small control circuits and heavier accessory feeds as well. Blade fuses follow a standard color code, so a 10-amp fuse is red and a 15-amp fuse is blue in every brand, and the amp value is stamped or printed on top of each fuse for quick identification in a dark footwell.

Counts matter as much as coverage. Some kits spread their pieces evenly, while others weight the middle values, 10, 15, and 20 amps, that blow most often in service. A transparent housing on each fuse also helps, because the broken element inside a blown fuse is visible at a glance.

Finally, look at the extras. A small puller in the box makes swapping a fuse in a tight panel far easier than working with fingertips or pliers, and one kit below includes a tester on the puller so a suspect fuse can be checked without a multimeter. One rule applies to every kit here: always replace a fuse with the same amp value that came out. A larger value defeats the protection the circuit was designed around, and a fuse that blows repeatedly is reporting a fault that needs diagnosis, not a bigger fuse.

1. Eaton Bussmann NO.44 ATC Blade Fuse Kit, 42 Pieces

The Bussmann NO.44 is the name-brand option in this lineup and the smallest kit here, aimed squarely at standard ATC fuse boxes. Eaton’s Bussmann line is the original equipment name behind a large share of factory fuse boxes, and this bonus pack keeps the formula simple: 42 ATC blade fuses in a spread of common values, color coded, with the amp value stamped on the front of each fuse.
The standout extra is the included fuse tester and puller. The tool grips a fuse for removal in a crowded panel, and its test function identifies a blown fuse without pulling each one for a visual check. The fuses themselves have transparent housings, so the element inside can be inspected directly as well. For an older support car or a trailer wired with ATC fuses throughout, this kit covers the whole box with pieces from a single maker, and the listing notes the fuses meet OE and SAE standards.

The trade-off is scope. There are no mini or low profile fuses in the box, so a newer car with a mini fuse panel needs one of the mixed kits below instead.

Specs

    • Model: NO.44
    • Piece count: 42 fuses
    • Fuse type: ATC standard blade
    • Extras: Fuse tester and puller included
    • Identification: Color coded, amp value stamped on the front of each fuse
    • Housing: Transparent, for visual inspection of the element
    • Standards: Meets OE and SAE standards, per listing
    • Manufacturer: Eaton Bussmann

    2. Nilight 50014R Low Profile Mini Blade Fuse Assortment, 140 Pieces

    Newer support cars increasingly use low profile mini fuses, and the Nilight 50014R is built entirely around that socket. All 140 pieces are low profile mini blade fuses, covering eleven amp values from 2 amps up to 40 amps: 2, 3, 5, 7.5, 10, 15, 20, 25, 30, 35, and 40. That is the widest single-type spread in this guide.

    Because every piece shares one footprint, the box stays simple to use at the roadside: find the color, confirm the number on top, and swap. Low profile fuses sit low in the panel, which makes them awkward to grip with fingers, so keeping a small puller from another kit alongside this assortment is a sensible pairing, since the listing for this kit centers on the fuses themselves.

    Specs

      • Model: 50014R
      • Piece count: 140 fuses
      • Fuse type: Low profile mini blade
      • Amp values: 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A, 40A
      • Application: Cars, trucks, boats, and SUVs with low profile mini fuse panels, per listing
      • Manufacturer: Nilight

      3. SIM&NAT Standard Blade Fuse Assortment, 130 Pieces

      The SIM&NAT kit is the standard-blade counterpart to the GBAuto mini set below, and it carries the widest amp spread of any kit here. Its 130 regular blade fuses, the ATC, APR, ATO, and ATS pattern, run through thirteen values from 1 amp to 40 amps: 1, 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30, 35, and 40. The low end matters for support duty, because small control and lighting circuits on trailers and older vehicles often sit at 1 to 4 amps, values many assortments skip.

      Each fuse has its amp value printed on top, and the listing gives the kit a 32-volt ceiling with a 40-amp maximum, in line with the 12-volt systems it serves. The listing also notes that the fuses sold are the regular blade type, a useful warning in a category where standard, mini, and low profile pieces are easy to confuse in photographs.

      A box like this suits the older end of the support fleet: the wagon with a standard fuse panel, the utility trailer, the boat trailer with its own lighting circuits.

      Specs

        • Part number: EA-MCF-A=130
        • Piece count: 130 fuses
        • Fuse type: Standard blade (ATC / APR / ATO / ATS)
        • Amp values: 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A, 40A
        • Voltage: 32 volts
        • Maximum current: 40 amps
        • Identification: Amp value printed on top of each fuse
        • Manufacturer: SIM&NAT

        4. GBAuto Mini Blade Fuse Assortment, 130 Pieces, With Puller

        The GBAuto set is the mini-blade specialist, holding 130 ATM and APM mini fuses across ten values from 2 to 35 amps. The distribution is weighted where roadside failures actually happen: twenty pieces each of the 5, 7.5, and 10 amp values, and ten each of the other seven values. A fuse puller is included in the box.

        The fuses carry a 32-volt figure in the listing, matching 12-volt vehicle systems, and the see-through design lets a blown element be spotted without removing every fuse in the row. Mini fuses are the default fit in a wide span of modern cars, crossovers, and SUVs, which makes this the natural glove box kit for a newer support vehicle that tows a bike trailer on weekends.

        Note the ceiling of 35 amps and the absence of standard and low profile pieces: this box serves one socket type deeply rather than several types thinly.

        Specs

          • Piece count: 130 fuses, plus 1 fuse puller
          • Fuse type: Mini blade (APM / ATM)
          • Amp values: 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A
          • Distribution: 20 pieces each of 5A, 7.5A, 10A; 10 pieces each of the remaining values
          • Voltage figure: 32V, per listing
          • Housing: See-through, for quick detection of a blown element
          • UPC: 701698016785

          5. Ferianl Car Fuse Assortment Kit, 300 Pieces

          The Ferianl kit is the big mixed box of this guide, with 300 fuses across three footprints: 50 micro fuses, 160 mini fuses, and 90 standard fuses. All three sizes run through the same eleven amp values, from 2 to 40 amps: 2, 3, 5, 7.5, 10, 15, 20, 25, 30, 35, and 40. Within each size, the counts lean toward the middle values.

          The listing describes a plastic housing with zinc alloy elements, chosen for corrosion resistance and conductivity, and each fuse carries its amp number on top with color coding to match. At 11.3 ounces for the whole package, the box is still glove-box sized, and for a household running a newer car on micro and mini fuses alongside an older trailer on standard fuses, one box covers every panel in the fleet.

          The breadth comes with a caveat: there is no maxi or cartridge coverage, and households with a single fuse type may prefer one of the focused kits above.

          Specs

            • Manufacturer part number: FER10AL
            • Piece count: 300 fuses (50 micro, 160 mini, 90 standard)
            • Fuse types: Micro, mini, and standard blade
            • Amp values: 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A, 40A
            • Materials: Plastic housing with zinc alloy element, per listing
            • Identification: Color coded, amp number marked on top of each fuse
            • Package weight: 11.3 ounces
            • Package dimensions: 8.82 x 5.24 x 0.91 inches

            Keeping the kit ready

            An assortment only helps if it is complete when needed. After any roadside swap, note the value used and refill that slot from a second box at home, so the glove box kit never silently runs out of the common values. Check the trailer circuits at the start of each season: trailer lighting runs exposed wiring, and its fuses are the ones most likely to be called on after a wet winter. When a fuse blows a second time on the same circuit, treat it as a wiring fault to be found, on the trailer harness especially, rather than a fuse problem to be fed.

            Frequently asked questions

            Which fuse type does my support car use?

            Check the fuse box lid or the owner manual, which names the fuse type for each panel. Older vehicles and many trailers use standard ATC or ATO blade fuses, most newer cars use mini ATM or APM fuses, and the newest panels add low profile mini and micro fuses.

            Can I replace a blown fuse with a higher amp value?

            No. The amp value is chosen to protect the wiring of that circuit, and fitting a larger fuse lets a fault draw more current than the wires are built to carry. Always fit the same value that came out, and if the replacement blows again, have the circuit checked for a short or a failing component.

            Why do trailer light fuses blow more often than car fuses?

            Trailer wiring lives outside the vehicle, where connectors corrode, insulation rubs through on the frame, and lamp housings take in water. Those faults draw extra current and take out the fuse protecting the trailer lighting circuit. Carrying spares in the values the trailer uses keeps the problem small.

            How many fuses should a glove box kit hold?

            Enough to cover every value in the panel, with depth in the common middle values. A focused kit of 42 to 140 pieces in the correct type serves one vehicle well, while a mixed fleet is better matched by a larger assortment of around 300 pieces spanning standard, mini, and micro sizes.

            M
            Mike Sullivan
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

            FAQ

            Which fuse type does my support car use?
            Check the fuse box lid or the owner manual, which names the fuse type for each panel. Older vehicles and many trailers use standard ATC or ATO blade fuses, most newer cars use mini ATM or APM fuses, and the newest panels add low profile mini and micro fuses.
            Can I replace a blown fuse with a higher amp value?
            No. The amp value is chosen to protect the wiring of that circuit, and fitting a larger fuse lets a fault draw more current than the wires are built to carry. Always fit the same value that came out, and if the replacement blows again, have the circuit checked for a short or a failing component.
            Why do trailer light fuses blow more often than car fuses?
            Trailer wiring lives outside the vehicle, where connectors corrode, insulation rubs through on the frame, and lamp housings take in water. Those faults draw extra current and take out the fuse protecting the trailer lighting circuit. Carrying spares in the values the trailer uses keeps the problem small.
            How many fuses should a glove box kit hold?
            Enough to cover every value in the panel, with depth in the common middle values. A focused kit of 42 to 140 pieces in the correct type serves one vehicle well, while a mixed fleet is better matched by a larger assortment of around 300 pieces spanning standard, mini, and micro sizes.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Bike Fuse Assortments: Top Picks For Support…Check price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.