Key takeaways
- Compare the best bike chin mounts for full-face helmets: strap, clamp and adhesive camera mounts for GoPro, DJI Osmo Action and Insta360 cameras.
The best bike chin mounts put an action camera exactly where your head points, low on the chin bar of a full-face helmet, so the footage follows your line of sight through corners, jumps and rock gardens. A camera on top of the helmet films over obstacles and makes trails look flatter than they are. A camera on the chin sits closer to eye level, keeps the bars and front wheel in frame, and gives a far better sense of speed and steepness.
Chin mounting is the standard setup for downhill, enduro and dirt riding, and the mounts fall into a few clear families. Strap mounts wrap around the chin bar and come off in seconds. Clamp mounts bite onto the chin guard with a spring jaw. Flexible adhesive mounts bend to match the curve of the shell, while rigid adhesive kits build the camera position from jointed arms on a stuck-on base. This guide covers five mounts across those families, all sold for full-face bike and motorcycle helmets.
As an Amazon Associate, I earn from qualifying purchases.
Why The Chin Position Works
A chin-mounted camera moves with your head, the most stable platform on the bike. Your neck absorbs vibration before it reaches the helmet, so chin footage looks calmer than footage from a bar-mounted camera that shakes with every root and braking bump. The position also matches how you ride: you look where you want to go, so the camera records the corner exit and the line choice rather than the sky or the front tire.
Two limits apply. The camera adds weight at the front of the helmet, felt on long descents, and the mount has to clear the visor and chin vents. Each product section below notes how its mount attaches, so you can match it to your helmet.
The Four Attachment Styles
Strap mounts use a webbing or elastic strap that loops around the chin bar and pulls a shaped base tight against it. They fit almost any full-face helmet, transfer between helmets in seconds, and leave nothing behind when removed. The trade-off is bulk, and a loosely fitted strap mount can shift slightly on a hard landing.
Clamp mounts skip straps and tape entirely. A spring-loaded jaw grips the chin guard itself, making them the fastest style to fit, remove and swap between helmets mid-ride. The jaw needs a chin bar edge it can bite, so very rounded or heavily padded chin guards are a poor match.
Flexible adhesive mounts use a bendable body, usually silicone over a thin metal core, bonded to the shell with strong double-sided tape. The base follows curved chin bars that defeat flat pads, and the soft material damps vibration. The bond is semi-permanent, and the tape is single-use.
Rigid adhesive kits stick a flat or curved base to the chin and build the camera position from jointed extension arms. They offer the most angle adjustment and suit odd chin shapes, but the joints add weight and leverage, so most kits include a safety tether.
What To Check Before Buying
Chin bar shape decides more than brand loyalty. A flat, angular chin bar suits strap and clamp mounts, while a strongly curved or pointed chin bar usually needs a flexible adhesive mount or a kit with curved pads. Check the vent layout too, because a base over a chin vent blocks airflow on climbs.
Camera interface is the second check. All five mounts here use the familiar two-prong action camera fitting, so GoPro Hero models connect directly. DJI Osmo Action cameras use the same prongs on most mounts here, and Insta360 cameras connect the same way or through an adapter. If your camera only has a threaded socket, look for a kit listing a 1/4 inch adapter.
Finally, plan a backup tether. A short safety rope between camera and helmet means a failed strap, jaw or tape bond costs you a dangling camera instead of a lost one. Two of the five kits below include one as standard.
The 5 Best Bike Chin Mounts
1. TELESIN Helmet Chin Mount: The Strap-On All-Rounder
TELESIN’s chin mount is the classic strap design: a shaped base sits on the front of the chin bar, a polyester fabric strap wraps around the bar, and a quick-release clamp holds the camera. The listing states it fits most full-face helmets and is easy to install and remove, making it the natural pick if you share one camera between two helmets.
The base is moulded from POM and PVC plastic, and the unit weighs 80 grams. Compatibility is the widest in this guide: the listing names GoPro Hero and Max models, DJI Osmo Action and Pocket models, Insta360 cameras, and older Sony, Contour, Drift and Garmin cameras on the same mounting prongs.
Specs
- Mount style: Strap-on with quick-release clamp
- Material: POM and PVC plastic with polyester fabric strap
- Weight: 80 g
- Dimensions: 99 x 93 x 21 mm
- Camera fit: GoPro Hero and Max, DJI Osmo Action, Insta360, Sony Action Cam, Garmin VIRB
2. Dango Design Gripper Mount: The Clamp That Needs No Tape
The Dango Design Gripper Mount takes the opposite approach to straps and glue. Its gripper jaw clamps directly onto the chin guard of a full-face helmet, using a flexible front web that conforms to the surface it bites. Nothing sticks and nothing wraps, so fitting takes seconds and the same mount moves between a mountain bike helmet and a motocross helmet in the parking lot.
Guide coverage notes that the jaw closes on chin guards and other thick surfaces, and that the camera position allows a full-face visor to close fully, which many strap bases prevent. This Amazon listing is the Action Orange colour; other colours are separate listings.
Specs
- Mount style: Spring-loaded clamp jaw, no straps or adhesive
- Fit: Clamps to chin guards and thick surfaces on full-face helmets
- Visor: Camera position allows the visor to close fully, per maker
- Camera fit: GoPro, DJI Osmo, Insta360 action cameras
- Colour: Action Orange (this listing)
3. MotoRadds Flex Slim: The Bendable Silicone Mount
The Flex Slim from MotoRadds solves the problem of chin bars that no rigid pad can match. Its body is silicone over a flexible steel core, so you bend the mount to the exact curve of your helmet once, and it holds that custom shape. A strip of 3M VHB tape bonds the base to the shell, and the silicone damps vibration.
Amazon’s specification table gives an item weight of 0.06 kilograms, a maximum weight capacity of 59 grams and a water resistant construction, with a rotatable camera tab so the angle can be set after the base is shaped. The listing names GoPro Hero 12, 11 and 10, DJI Osmo Action, Insta360, SJCAM and Xiaomi Yi cameras. Pick it when strap bases rock on your chin bar and flat pads only touch at the edges.
Specs
- Mount style: Flexible adhesive, bendable body with 3M VHB tape base
- Material: Silicone over a flexible steel core, polycarbonate camera tabs
- Item weight: 0.06 kg
- Maximum weight capacity: 59 g, per listing
- Water resistance: Water resistant, per listing
- Camera fit: GoPro Hero 12/11/10, DJI Osmo Action, Insta360, SJCAM, Xiaomi Yi
4. SUREWO Helmet Chin Mount Kit: The Adjustable Arm Kit
SUREWO builds its chin mount as a kit of jointed parts rather than a fixed base. Four joints can each be adjusted, dismantled and reassembled, so the camera can sit close to the chin or extend outward for a wider view of the bars. The box also includes a J hook mount for top or front helmet positions, a safety rope buckle the maker tells you to install, and an S-adapter for cameras with a 1/4 inch threaded hole.
The enclosure is plastic, the kit weighs 0.37 pounds, and the listing gives a maximum weight capacity of 400 grams, the highest figure in this guide, suiting heavier camera and light combinations. Compatibility covers GoPro Hero 13 down to Hero 5, DJI Osmo Action, AKASO, Campark, YI and Insta360 cameras.
Specs
- Mount style: Jointed arm kit, four adjustable joints
- Material: Plastic
- Model number: SW-JSA-035
- Item weight: 0.37 lb
- Maximum weight capacity: 400 g, per listing
- In the box: Chin mount, J hook mount, safety rope buckle, S-adapter (1/4 inch thread)
- Camera fit: GoPro Hero 13 to 5, DJI Osmo Action, AKASO, Campark, YI, Insta360
5. Lupholue Chin Mount Kit Version B: The Big-Pad Adhesive Kit
Lupholue’s Version B kit sticks to the chin with adhesive pads, and its update over earlier versions is an enlarged adhesive area for a stronger hold on the shell. Both flat and curved pads are included, so the base can match flat-faced and rounded chin bars, and the listing states the mount suits long-chin and short-chin helmets, with an arm that adjusts the camera angle after fitting.
Security gets a second layer: the kit adds a safety buckle and a hanging rope as a double protection system against losing the camera. Amazon’s fields give a maximum weight capacity of 76 grams, and the Canadian listing records an item weight of 18 grams. Compatibility runs from GoPro Hero 13 back to Hero 3 and Session models, plus Xiaomi Yi, SJCAM and Campark.
Specs
- Mount style: Adhesive pads, flat and curved bases included
- Adhesive area: Enlarged over earlier versions, per listing
- Safety: Safety buckle plus hanging rope tether
- Maximum weight capacity: 76 g, per listing
- Camera fit: GoPro Hero 13 to 3 and Session, Xiaomi Yi, SJCAM, Campark
- Version: B
Fitting And Care Tips That Apply To Every Mount
Clean the chin bar before fitting anything. Tape bonds fail on sunscreen, dust and silicone polish, and strap bases slip on them too, so wipe the area with a prep pad if one is included, or a damp cloth, and let it dry. Fit the mount with the camera attached, then check the frame on the camera screen: the horizon should sit level, with a sliver of front wheel or bars at the bottom.
For adhesive mounts, press the base firmly for a full minute and leave the bond overnight before riding. For strap and clamp mounts, re-check tension after the first descent, because webbing settles under vibration. Add the tether if your kit includes one.
Frequently Asked Questions
Will a chin mount fit an open-face or half-shell helmet?
No. Every mount in this guide needs a full-face chin bar to strap, clamp or stick to. Half-shell helmets have no surface at the chin, so riders with those helmets use a chest mount or a vent strap mount instead, covered in separate guides on this site.
Does a chin mount block the visor or chin vents?
It can, depending on the helmet. Strap bases sit low on the chin bar and usually clear the visor, and the Dango Design clamp is shaped so the visor closes fully, but any base fitted too high can foul a vent slider or the visor’s bottom edge. Fit the mount with the visor moving through its full range before the first ride.
Which camera brands work with these mounts?
All five mounts use the standard two-prong action camera fitting. GoPro Hero and Max cameras connect directly, DJI Osmo Action cameras use the same prongs, and Insta360 cameras fit directly or through an adapter. The SUREWO kit also includes an S-adapter for cameras with only a 1/4 inch threaded socket.
Strap, clamp or adhesive: which style lasts longest?
Each fails differently. Straps stretch and buckles loosen over a season but are easy to re-tighten. Clamp jaws keep their spring tension and leave the helmet untouched. Adhesive bonds are the most solid day to day, but the tape is single-use, so moving the mount means new pads and a full clean of the shell.
Pick the attachment style that matches your chin bar shape, confirm your camera’s fitting is on the compatibility list, and tether the camera whatever you choose.
FAQ
Will a chin mount fit an open-face or half-shell helmet?
Does a chin mount block the visor or chin vents?
Which camera brands work with these mounts?
Strap, clamp or adhesive: which style lasts longest?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




