Key takeaways
- BASENOR jack pads protect a Tesla battery and chassis during home lifts. Fitment, TPE build, load capacity and the checks to run before you buy.
Lifting a Tesla is a different job from lifting a regular car. The battery pack sits under the floor, the jack points are small reinforced pads, and a floor jack placed in the wrong spot can dent the pack case or crack the paint around the lift point. That is why Tesla owners buy dedicated jack pads instead of trusting a bare jack saddle. A pad spreads the load, seats into the factory jack point, and keeps metal away from the battery enclosure.
This guide is for Tesla owners who rotate tires at home, swap seasonal wheels in the driveway, or take their car to a tire shop and want to hand the fitter the right gear. The BASENOR set below was picked from its Amazon listing title and spec table, and the sections that follow cover fitment, material, load capacity and what arrives in the box.
Quick Picks
As an Amazon Associate we earn from qualifying purchases
| Product | Best for | Key spec from title |
|---|---|---|
| BASENOR Lifting Jack Pad for Tesla Model 3, Y, S and X | Home tire rotations and seasonal wheel swaps | TPE jack pucks, odorless, 10x hardness, dual 20 mm and 25 mm O-rings |
How to Choose
Match the pad to your Tesla jack points
Tesla jack points are not all the same size, and that is the first thing to check. The BASENOR set uses dual-size O-rings that fit both 20 mm and 25 mm jack points without adapters, so one set covers the range across Model 3, Model Y, Model S and Model X. Before you order, look at the listing years for your car: the Amazon title covers 2013-2026 Model S and X and 2017-2027 Model 3 and Y. If your car is a newer variant such as a Model Y Juniper, confirm the jack point size against the listing before you buy, because a pad that does not seat properly will not protect anything.
Pick a material that stays put under load
A jack pad has one job under pressure: stay in place and keep metal off the car. This set is made from TPE, which the listing describes as odorless and ten times harder than traditional options, so it resists squashing out from under the jack point when the car comes up. A soft rubber pad can deform and let the jack saddle creep toward the battery case, which defeats the purpose. Check that the pad surface grips the jack point rather than sliding on it, and wipe the pad clean before each use, because grit trapped between pad and paint can scratch the finish it is meant to protect.
Check load capacity and lifting height
The Amazon spec table lists a load capacity of 1,102.3 lb, which is 500 kg per pad, and a maximum lifting height of 10 meters. That capacity is more than enough for one corner of any Tesla, since a single corner carries only a fraction of the car’s weight. Do not trust a higher figure from a mirror listing of a differently titled variant, which quotes 750 kg; the Amazon table’s 500 kg is the figure to use. Also remember that the pad is a lifting aid, not a stand: once the car is up, lower it onto a proper jack stand before you put any part of yourself underneath.
Look at what comes in the box
A complete set saves a second order. The BASENOR box holds four floor jack pads, four large O-rings, four small O-rings and one free storage case, so all four corners are covered in a single purchase. The case matters more than it sounds: pads kept loose in a garage get dirty, and dirty pads mark paint. The set measures 7.87 by 3.94 by 2.36 inches per pad and weighs 7 ounces, so the case fits easily in a frunk or trunk. If you only ever lift one corner at a time, you still want the full set, because tire rotations need two corners up in sequence.
The 1 Best Option
BASENOR Lifting Jack Pad for Tesla Model 3, Y, S and X
The BASENOR set is a straightforward answer to a specific Tesla problem: the factory jack points are small, and a bare jack saddle can damage the battery enclosure or the paint around them. Four TPE pads with dual-size O-rings seat into the jack points on Model 3, Model Y, Model S and Model X, spreading the load and keeping the jack away from the battery case. The included case keeps the set together in the trunk, so the pads are there whether you lift the car at home or hand them to a tire fitter.
Specs
- Fits Tesla Model 3, Y, S and X; listing years 2013-2026 Model S/X and 2017-2027 Model 3/Y
- Material: TPE, odorless, 10x hardness versus traditional options
- Dual-size O-rings fit 20 mm and 25 mm jack points without adapters
- Load capacity: 1,102.3 lb (500 kg) per the Amazon spec table
- Maximum lifting height: 10 meters
- Included: 4 floor jack pads, 4 large O-rings, 4 small O-rings, 1 free storage case
- Item dimensions: 7.87 x 3.94 x 2.36 inches (20 x 10 x 6 cm)
- Item weight: 7 ounces
- Colour: Black; style: Tesla Floor Jack; vehicle specific fit
- Manufacturer part number / OEM part number: CA045-4
- Sustainability: Global Recycled Standard certified, at least half recycled material
Best for: Tesla owners who rotate tires or swap seasonal wheels at home and want the battery and paint protected at every lift.
Watch out for: mirror listings disagree on availability and the Amazon crawl dates from February 2026, so check the live Amazon listing before you order.
Which One Fits Your Situation
You rotate tires or swap wheels at home
This is the exact job the BASENOR set is made for. Seat a pad into each factory jack point, lift one corner at a time with a floor jack, and the pad keeps the jack saddle off the battery enclosure and the paint. The dual-size O-rings mean you do not need to measure your jack points first, and the case keeps the set in the trunk between jobs.
You take your Tesla to a tire shop
Bring the BASENOR pads with you. Many tire fitters do not stock Tesla-specific pads, and a shop jack on a bare saddle is the most common way a battery case gets dented. Hand the fitter the pads, point out the factory jack points, and the lift goes the way Tesla intended. The set weighs little and the case keeps it clean in the trunk.
You own a newer Tesla variant
Check the listing years before you buy. The Amazon title covers Model S and X from 2013 to 2026 and Model 3 and Y from 2017 to 2027, and some mirror titles mention newer variants such as Model Y Juniper. If your car falls outside the listed years, measure the jack point and confirm fitment with the seller rather than assuming the pads will seat.
You lift with a two-post shop lift
A different approach fits better here. The BASENOR pads are sized for floor jacks and home lifting, and a two-post lift uses its own arms and adapters. A shop with Tesla experience will have the correct lift adapters already, so ask the shop what it uses instead of bringing home-lift pucks to a commercial lift.
Common Mistakes
- Lifting on a bare jack saddle and denting the battery case or cracking paint around the jack point.
- Using a pad that does not seat into the jack point, so it slips out as the car rises.
- Trusting a mirror listing’s 750 kg capacity figure instead of the Amazon spec table’s 500 kg.
- Leaving the car on the jack while working underneath instead of lowering it onto a proper jack stand.
- Storing pads loose and dirty in the garage, then pressing grit into the paint at the next lift.
Frequently Asked Questions
Will these pads fit my Tesla?
The set covers Model 3, Model Y, Model S and Model X, with the Amazon title listing 2013-2026 for Model S and X and 2017-2027 for Model 3 and Y. The dual-size O-rings fit both 20 mm and 25 mm jack points without adapters. If your car is a newer variant, confirm the jack point size against the listing before ordering.
How much weight can one pad hold?
The Amazon spec table lists a load capacity of 1,102.3 lb, which is 500 kg per pad. That is far more than one corner of a Tesla weighs, so a single pad handles its corner easily. Ignore the 750 kg figure seen on a mirror of a differently titled variant; the Amazon table is the source to trust.
Do I need all four pads?
Yes, if you rotate tires or swap wheels. A full rotation needs two corners lifted in sequence, and having four pads means you never reuse a pad that is already under load. The box includes four pads, four large O-rings, four small O-rings and a storage case, so the set is complete in one purchase.
Can I leave the car on the jack with these pads?
No. The pads are a lifting aid, not a stand. Use them to raise the car, then lower it onto a proper jack stand before you work underneath. Never put any part of yourself under a car supported only by a jack, with or without pads fitted.
FAQ
Will these pads fit my Tesla?
How much weight can one pad hold?
Do I need all four pads?
Can I leave the car on the jack with these pads?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.
