Updated Nov 21, 2026· 9 min read

Key takeaways

  • Compare the best bike drill bit sets for workshop jobs, from cobalt sets for seized steel bolts to brad point bits for clean holes in wooden racks.

As an Amazon Associate, I earn from qualifying purchases.

Our top pick: IRWIN Drill Bit Set, M35 Cobalt, 29-Piece (3018002). Runner-up: DEWALT Titanium Nitride Coated Drill Bit Set, 29-Piece (DW1369).

A drill bit set earns its keep in a bike workshop on jobs around the bikes themselves: opening up a wall for storage hooks, drilling pilot holes in a homemade wooden rack, enlarging a hole in a bracket, and drilling into steel and aluminium parts. Every pick below is a general workshop set rather than a bicycle product, and that is the honest framing — no maker sells a bit set for bikes, but the twist, brad point and cobalt sets here cover the drilling a home mechanic actually does.

The five sets differ in the ways that matter: bit material, point style, shank type and size coverage. One is a cobalt set for hardened metal, one is a titanium coated all-rounder, one is an impact-ready hex shank set, one is a brad point set for clean holes in wood, and one is a large multi-type assortment.

What To Check Before Choosing A Drill Bit Set

Bit material decides what you can drill. Plain high-speed steel with a black oxide finish handles wood, plastic and light-gauge metal. Titanium nitride coated bits add a hard, low-friction surface that holds an edge longer in steel and aluminium. Cobalt alloy bits, usually M35 grade with five percent cobalt mixed through the steel rather than coated on top, are the step up for hardened and stainless steel: they tolerate the heat that dulls lesser bits, which is why cobalt is the pick for stubborn steel hardware.

Point style controls the start of the hole. A split point tip is ground so the bit centres itself instead of skating across smooth metal. DEWALT’s Pilot Point goes further, with a small pilot tip that starts on contact and leaves a cleaner, burr-free hole. A brad point is a wood-only design: a centre spike flanked by two spurs that score the surface first, so holes in timber start exactly on the mark and exit with less splintering.

Shank type decides what the bit fits. Round shanks suit any standard chuck. Three-flat shanks add flats that stop the bit spinning in the chuck under load. Quarter-inch hex shanks click into impact drivers and quick-change holders as well as ordinary chucks, making them the fastest option for swapping sizes mid-job.

Size coverage matters more than piece count. A 29-piece set in 1/64 inch steps gives one bit per size from 1/16 to 1/2 inch. Smaller sets often double up on the sizes that snap most often, such as 1/8 and 3/16 inch, which is genuinely useful.

1. IRWIN Drill Bit Set, M35 Cobalt, 29-Piece (3018002)

The IRWIN 3018002 is the set here built for hard metal. Its 29 bits are M35 cobalt alloy steel, the grade makers aim at hardened steel, stainless steel and cast iron, and they run from 1/16 to 1/2 inch in fine 1/64 inch steps, so the exact size for a clearance or pilot hole is almost always in the case. The bits carry 135-degree split point tips that start without wandering, and the set ships in a metal index case.

For a bike workshop, this is the set for the unpleasant jobs: steel brackets, steel workstand and trainer frames, and hardened fasteners where a coated bit would overheat and dull. Cobalt bits are more brittle than plain high-speed steel, so they reward a steady hand and cutting fluid on steel. The trade-off for the fine size steps is that there are no spares — snap the 1/8 inch bit and that slot stays empty.

Specs

    • Brand: IRWIN
    • Model: 3018002
    • Pieces: 29
    • Material: M35 cobalt alloy steel
    • Sizes: 1/16 in to 1/2 in, in 1/64 in steps
    • Point style: 135-degree split point
    • Length: jobber length
    • Case: metal index case

    2. DEWALT Titanium Nitride Coated Drill Bit Set, 29-Piece (DW1369)

    The DEWALT DW1369 is the general-purpose pick: 29 titanium nitride coated bits covering the same 1/16 to 1/2 inch span as the IRWIN, but aimed at everyday drilling in metal, wood and plastic rather than hardened steel. The defining feature is the Pilot Point tip, which DEWALT says starts on contact, reduces walking and leaves clear, burr-free holes. A patented web taper adds strength along the flute, helping the smaller sizes survive clumsy starts.

    This is the set that covers most of what a home mechanic drills: pilot holes in aluminium sheet for a DIY bracket, holes in steel tube for a rack project, and general work around the bench. The bits come in DEWALT’s tough case with a clear lid, so sizes are visible before you open it. Titanium coating is a surface treatment rather than a different steel, so once it wears at the cutting edge the bit behaves like the high-speed steel underneath.

    Specs

      • Brand: DEWALT
      • Model: DW1369
      • Pieces: 29
      • Material: high-speed steel with titanium nitride coating
      • Sizes: 1/16 in to 1/2 in
      • Point style: Pilot Point
      • Case: tough case with clear lid

      3. Milwaukee SHOCKWAVE RED HELIX Titanium Drill Bit Set, 23-Piece (48-89-4631)

      Milwaukee’s 23-piece set is the pick for anyone who reaches for an impact driver before a drill. Every bit has a quarter-inch hex shank, so bits swap in seconds and work in impact drivers and standard chucks alike. The titanium coated bits use Milwaukee’s RED HELIX flute design, a variable helix that starts at an aggressive 35 degrees and ends at 15 degrees, which the maker says clears chips quickly and limits the heat build-up that dulls edges. The 135-degree split point tip resists walking.

      Sizes run from 1/16 to 1/2 inch with duplicates of the most-used diameters instead of one of everything, a practical layout for jobs like drilling out wall plugs and opening holes in mudguard stays. For bike storage projects — hooks, rails and wall mounts — the hex shank convenience is hard to beat, because the same driver that sinks the screws can drill the pilot holes.

      Specs

        • Brand: Milwaukee
        • Model: 48-89-4631
        • Pieces: 23
        • Material: titanium coated steel, RED HELIX flute design
        • Sizes: 1/16 in to 1/2 in
        • Point style: 135-degree split point
        • Shank: 1/4 in hex, for drills and impact drivers
        • Case: storage case included

        4. DEWALT Drill Bit Set, Brad Point, 6-Piece (DW1720)

        The DW1720 is the specialist of the five: six brad point bits in high-speed steel, made only for wood. The sizes are 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2 inch — the diameters that come up again and again in timber projects. DEWALT gives the bits precise cutting edges to reduce splintering, a brad point tip that decreases walking, and engineered flutes that clear chips cleanly, and the listing calls the set out as ideal for dowelling.

        In a bike context this is the set for wooden work: accurate holes in a timber bike rack, a plywood workbench top, or the battens behind a wall-mounted storage rail, where a twist bit would wander on the grain and tear the exit side. Six pieces is a small count with no fine sizes for pilot holes, so this set partners a twist set rather than replacing one. Keep it away from metal entirely — brad point spurs are ground for timber fibres and dull quickly on anything harder.

        Specs

          • Brand: DEWALT
          • Model: DW1720
          • Pieces: 6
          • Material: high-speed steel (HSS)
          • Sizes: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2 in
          • Point style: brad point
          • Intended material: wood, including dowelling work

          5. Hi-Spec Drill Bit Set, 130-Piece Multi SAE

          The Hi-Spec set takes the opposite approach to the IRWIN: 130 pieces across three bit types, in a slim tray case. The bulk of it is 78 titanium coated twist bits in HSS4241 high-speed steel with round shanks, covering eight sizes from 1/16 to 3/8 inch with many duplicates of each. Alongside them sit 26 brad point bits for wood and 26 masonry bits with tungsten carbide tips, both groups in five sizes from 5/32 to 3/8 inch.

          That mix maps neatly onto fitting out a space for bikes: twist bits for metal and plastic, brad points for timber racks, and masonry bits for anchoring storage hooks into a brick or concrete garage wall. The compromises are real — the size range stops at 3/8 inch, the steel is a basic grade, and the bits arrive bagged in a tray rather than in a labelled index. As a first set covering three materials at once, though, nothing else here matches its spread.

          Specs

            • Brand: Hi-Spec
            • Pieces: 130
            • Contents: 78 titanium coated HSS twist bits, 26 brad point bits, 26 masonry bits
            • Twist bit material: HSS4241 high-speed steel, titanium coated, round shank
            • Masonry bit tips: tungsten carbide (YG8C)
            • Sizes: 1/16 in to 3/8 in across 11 sizes
            • Case: slim tray case with clear insert

            Matching The Set To Common Workshop Jobs

            For drilling into a brick or block garage wall to hang bikes, the Hi-Spec set is the only one of the five with masonry bits in the case. For steel and aluminium work — brackets, stands, trainer parts — the DEWALT DW1369 handles everyday jobs and the IRWIN cobalt set takes over when the metal is hardened or stainless. For timber racks and bench tops, the DEWALT brad point set gives the cleanest holes, with the Milwaukee hex shank set as the fast option when one impact driver is also driving the screws. Riders setting up from nothing get the most coverage by pairing the Hi-Spec assortment with one good twist set; riders who already own bits should fill the gap that hurts most, usually cobalt for metal or brad points for wood.

            Frequently Asked Questions

            Which drill bit material is best for drilling steel parts and hardware?

            Cobalt alloy bits, such as the M35 set from IRWIN in this guide, are the strongest choice for hardened and stainless steel because the cobalt is mixed through the steel and tolerates drilling heat. Titanium coated bits like the DEWALT DW1369 and the Milwaukee set handle mild steel and aluminium well, but the coating is only a surface layer. Plain high-speed steel suits wood, plastic and light-gauge metal.

            Can brad point bits be used on metal or plastic?

            Brad point bits are ground for wood. The centre spike and outer spurs are shaped to score timber fibres before cutting, and the DEWALT DW1720 listing describes the set as a wood and dowelling set. On metal the spurs can catch, wander and dull quickly. Use a twist bit with a split point or pilot point for metal and plastic instead.

            Do hex shank drill bits fit a normal drill chuck?

            Yes. A quarter-inch hex shank, like the ones on the Milwaukee SHOCKWAVE set, fits a standard three-jaw chuck as well as an impact driver or quick-change holder, and the hex shape stops the bit spinning in the chuck under load. The reverse is not true: round and three-flat shank bits cannot lock into an impact driver’s quick-release collet, so hex shanks are the flexible option when both tools are on the bench.

            How can I make drill bits last longer in a home workshop?

            Match the bit to the material first — most early failures come from running wood bits on metal or plain steel bits on hardened fasteners. Use a slower speed and steady pressure on steel, add a drop of cutting oil on thicker metal, and let the flutes clear chips instead of forcing the bit. Store bits in their case slots rather than loose in a drawer, where the edges chip against each other, and replace a bit that has gone blue from overheating.

            The Bottom Line

            There is no single best set here, only a best match for the work. Choose the IRWIN 3018002 for hard metal, the DEWALT DW1369 as the everyday twist set, the Milwaukee 48-89-4631 for impact driver convenience, the DEWALT DW1720 for clean holes in wood, and the Hi-Spec 130-piece set when one case has to cover metal, timber and masonry.

            M
            Mike Sullivan
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

            FAQ

            Which drill bit material is best for drilling steel parts and hardware?
            Cobalt alloy bits, such as the M35 set from IRWIN in this guide, are the strongest choice for hardened and stainless steel because the cobalt is mixed through the steel and tolerates drilling heat. Titanium coated bits like the DEWALT DW1369 and the Milwaukee set handle mild steel and aluminium well, but the coating is only a surface layer. Plain high-speed steel suits wood, plastic and light-gauge metal.
            Can brad point bits be used on metal or plastic?
            Brad point bits are ground for wood. The centre spike and outer spurs are shaped to score timber fibres before cutting, and the DEWALT DW1720 listing describes the set as a wood and dowelling set. On metal the spurs can catch, wander and dull quickly. Use a twist bit with a split point or pilot point for metal and plastic instead.
            Do hex shank drill bits fit a normal drill chuck?
            Yes. A quarter-inch hex shank, like the ones on the Milwaukee SHOCKWAVE set, fits a standard three-jaw chuck as well as an impact driver or quick-change holder, and the hex shape stops the bit spinning in the chuck under load. The reverse is not true: round and three-flat shank bits cannot lock into an impact driver’s quick-release collet, so hex shanks are the flexible option when both tools are on the bench.
            How can I make drill bits last longer in a home workshop?
            Match the bit to the material first — most early failures come from running wood bits on metal or plain steel bits on hardened fasteners. Use a slower speed and steady pressure on steel, add a drop of cutting oil on thicker metal, and let the flutes clear chips instead of forcing the bit. Store bits in their case slots rather than loose in a drawer, where the edges chip against each other, and replace a bit that has gone blue from overheating.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Bike Drill Bit Sets: Top Picks For…Check price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.