Updated Nov 21, 2026· 9 min read

Key takeaways

  • Compare the best bike pick sets for seal and O-ring work, from compact mini hooks for fork service to long heavy-duty picks for deep workshop jobs.

Picks and hooks are the smallest tools in a bike workshop and some of the most reached-for. A suspension fork service begins with prising out dust wipers and walking foam rings off the stanchions. A brake bleed or hose shortening involves lifting tiny O-rings from lever and caliper fittings without scoring the seats they seal against. Derailleur and brake springs, retaining clips, cable end seals, hub pawls and the seals inside a dropper post all call for a pointed tool that can get under an edge, pull in a straight line, or fish a small part out of a bore. Fingernails and screwdriver blades do this work badly: the blade is too wide, the edge too blunt, and the risk of a scratched sealing surface is real.

Our top pick: TEKTON Pointed Pick And Hook Set, 5-Piece. Runner-up: GEARWRENCH 4 Pc. Mini Hook And Pick Set.

The five sets below cover the size range a bike workshop actually uses. One is a hardened precision set built around fine tapered points for seal work. Two are mini sets for small fittings and tight bores. Two are long-reach sets for jobs where the part sits deep, such as fork lowers, hose runs and hub shells. Every shape, length and material named here comes from the product listing for that set.
As an Amazon Associate, I earn from qualifying purchases.

What Bike Work Asks Of A Pick And Hook Set

Tip shape decides most jobs. A straight pick slides under a flat seal or O-ring and lifts it evenly. A 90-degree pick reaches around a corner, which suits O-rings seated in a groove inside a fitting. A full hook pulls: it is the shape for springs, retaining rings and cotter-style pins that need drawing toward you. Compound and offset tips combine bends for parts that sit at an angle to the opening. A set with only straight picks will leave the hooked jobs undone, so shape coverage matters more than raw piece count.

Shaft strength is the second filter. Seal work is a prising job, and a soft shaft bends at the tip, then either slips or snaps. Hardened alloy and carbon steel shafts hold their point under that side load. Length is the third: mini sets around five to seven inches suit lever fittings, caliper bores and electronic parts, while long sets reach down fork legs, into hub shells and along frame tubes when a cable guide or hose needs persuading. Handles follow the same split: slim handles give feel for delicate seal work, and larger grips give the pull force that springs and hoses demand.

1. TEKTON Pointed Pick And Hook Set, 5-Piece

This is the precision set of the group, and the one aimed most directly at seal and O-ring work. Its five tools are four picks, in straight, 45-degree, compound and 90-degree shapes, plus a single 130-degree hook. Per the listing, the pick and hook tips come to a sharp 30-degree tapered point, a profile intended to keep strength close to the tip while still sliding under a seal edge. That taper is what fork dust wipers and brake fitting O-rings ask for: thin enough to enter the gap, stout enough to lever against.

The shafts are AISI 8650 steel, a nickel-chromium-molybdenum alloy that TEKTON lists as hardened to 50 to 54 HRC, and the set is made in the USA. Overall length is 6.6 inches, which places it in the standard bench class rather than the mini class: long enough for leverage on a wiper seal, short enough to control inside a caliper bore. The set weighs 0.4 pounds. For a workshop whose pick work is mostly suspension seals, hydraulic fittings and hub internals, this is the most directly relevant set here, though with only one hook shape it leans toward picking and lifting rather than pulling springs.

Specs

  • Brand: TEKTON
  • Model: PNH90102
  • Pieces: 5
  • Contents: Straight pick, 45-degree pick, compound pick, 90-degree pick, 130-degree hook
  • Tip profile: 30-degree tapered point, per listing
  • Shaft material: AISI 8650 steel, hardened to 50-54 HRC, per listing
  • Overall length: 6.6 in.
  • Weight: 0.4 lb
  • Origin: Made in USA
  • ASIN: B0D9MJGPV4

2. GEARWRENCH 4 Pc. Mini Hook And Pick Set

GEARWRENCH’s mini set shrinks the format for the smallest fittings on a bike. The four tools are a mini full hook, a 90-degree mini hook, a mini straight hook and a mini offset hook, per the listing’s included components. Short shafts and small hooks suit the jobs where a full-size pick is simply too big: the O-rings on hydraulic hose fittings, seals inside brake lever master cylinders, the small clips in shifter mechanisms, and the pawls and springs inside a freehub body, where a standard hook cannot turn in the space available.

The listing gives the set’s part number as 84040H and the maker as the Apex Tool Group. Because all four pieces are hooks rather than a pick-and-hook mix, the set is at its best pulling and lifting small parts toward you rather than prising under wide seals; a fork wiper, for example, wants a broader, stronger blade than a mini hook offers. Read it as the small-work companion to a standard set, sized purely for fittings and bores.

Specs

  • Brand: GEARWRENCH
  • Model: 84040H
  • Pieces: 4
  • Contents: Mini full hook, 90-degree mini hook, mini straight hook, mini offset hook
  • Format: Mini
  • ASIN: B08KHSCH72

3. Ullman PSP-4 Steel Pick And Hook Set

Ullman is a long-running American maker of inspection and retrieval tools, and the PSP-4 is its traditional compact set: four steel tools at 5-1/16 inches overall. The contents are a full hook, an angle hook, a 90-degree tool and a straight pick, which between them cover the basic moves of seal work: slide under, turn the corner, hook and pull. The maker’s stated applications for the model are O-ring removal and marking metal, and both translate directly to the bench: O-rings come out of brake and suspension fittings constantly, and a hard pick point scribes timing and position marks on parts during a rebuild.

At just over five inches, the PSP-4 sits at the small end of the standard class, close in spirit to the mini sets but with a straight pick in the mix, which the GEARWRENCH mini set lacks. The design is plain steel without the shaped grips of larger sets, which keeps the profile slim for working inside lever bodies and small bores.

Specs

  • Brand: Ullman
  • Model: PSP-4
  • Pieces: 4
  • Contents: Full hook, angle hook, 90-degree tool, straight pick
  • Overall length: 5-1/16 in.
  • Material: Steel
  • Stated applications: O-ring removal, marking metal
  • ASIN: B005YT6KQA

4. GEARWRENCH 4 Pc. Heavy-Duty Long Hook And Pick Set

The second GEARWRENCH set in this guide is the opposite end of the same idea: a heavy-duty long set, model 84020H, built for reach and pull. Its four tools are a full hook, a straight pick, a 90-degree pick and a combination pick, per the listing. Longer shafts change the jobs a pick can do. Down a fork leg, inside a hub shell, along a frame’s internal cable route or behind a bottom bracket, a standard six-inch pick runs out of length, and a long pick keeps your hand clear of the opening while the tip does the work.

Heavy-duty construction matters for the pulling jobs in that list: freeing a stuck hose, drawing a spring into place or walking a stubborn seal out of a deep bore all load the shaft sideways, and a long shaft multiplies that leverage. This is the set for suspension and frame work rather than fitting work, and it pairs with any of the compact sets above rather than replacing them.

Specs

  • Brand: GEARWRENCH
  • Model: 84020H
  • Pieces: 4
  • Contents: Full hook, straight pick, 90-degree pick, combination pick
  • Format: Heavy-duty long
  • Manufacturer: Apex Tool Group
  • ASIN: B08KHTVFW3

5. ROTATION Extra Long Precision Hook And Pick Set, 6-Piece

The ROTATION set is the value route to long reach. Six pieces give it the highest count in this guide, and the listing dimensions set the scale: each pick measures 210 mm overall, about 8.26 inches, with a 100 mm rod, which places the set between the standard and heavy-duty long classes. The listing title names chrome vanadium steel shafts, the product description describes heat-treated carbon steel shafts with ergonomic, non-slip grips, and the stated work is removing hoses and gaskets, with springs, oil seals and O-rings named among the uses.

That combination fits the mid-depth jobs on a bike: lifting fork foam rings and wiper seals, freeing brake hoses from their fittings, pulling O-rings from suspension and drivetrain parts, and reaching seals that sit further inside a component than a mini set can touch. The listing does not enumerate the individual tip shapes in the set, so the honest summary is six long picks and hooks for hose, gasket and seal work rather than a named shape list.

Specs

  • Brand: ROTATION
  • Model: TC 18005
  • Pieces: 6
  • Overall length: 210 mm (8.26 in.), rod length 100 mm, per listing
  • Shaft: Chrome vanadium steel per listing title; heat-treated carbon steel per product description
  • Handles: Ergonomic, non-slip, per listing
  • Stated uses: Hoses, gaskets, oil seals, O-rings, springs
  • ASIN: B09Y9F3L7P

How To Choose And Look After A Pick Set

Start from the seals you actually meet. Fork and shock service, brake hose work and hub rebuilds cover most bike pick work, and they split cleanly by depth: fittings and bores want mini or standard sets, while fork legs, hub shells and frame internals want length. A workshop that does both ends of that range will end up with two sets, one compact and one long, and the five above are arranged so any compact set pairs with either long set without duplicating shapes.

Use picks with restraint. Work the tip under a seal a little at a time and walk around the part rather than levering from one point, which keeps sealing surfaces unmarked. Keep picks for seals and small parts only: the moment a pick becomes a general pry bar, its fine tip bends or breaks, and a damaged tip then scores the next seal it touches. Wipe shafts clean after suspension work, and store the set where the points cannot knock against harder tools. A bent or burred point can be dressed on a fine stone; a snapped one retires the tool.

FAQ

What do picks and hooks do in a bike workshop?

They lift, pull and retrieve the small soft and spring parts that fingers and blades cannot reach: fork dust wipers and foam rings, O-rings in brake and suspension fittings, hose seals, retaining clips, hub pawls and springs. Each shape has a role, with straight picks lifting, angled picks turning corners inside fittings, and hooks pulling parts toward you.

Which pick shapes matter most for seal work?

A straight pick and a 90-degree pick cover most seals, because one slides under a flat seal edge and the other reaches an O-ring seated in a groove. A full hook earns its place for springs and retaining rings. Sets such as the TEKTON PNH90102 add compound and 45-degree tips for parts seated at an angle to the opening.

When does a workshop need a long pick set?

When the part sits deeper than a standard pick can reach: down fork legs, inside hub shells, along internal cable routes and behind bottom brackets. Long sets such as the GEARWRENCH 84020H and the ROTATION six-piece keep your hand clear of the opening and add the shaft strength that pulling stuck hoses and deep seals demands.

Can a pick damage a seal seat?

Yes, if it is forced. A pick tip is harder than the aluminium and plastic seats most bike seals sit in, so levering from one point or digging at an angle can score the surface the seal must close against. Working the tip under the seal gradually, walking around the part and keeping the point on the seal rather than the seat avoids that damage.

M
Mike Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

What do picks and hooks do in a bike workshop?
They lift, pull and retrieve the small soft and spring parts that fingers and blades cannot reach: fork dust wipers and foam rings, O-rings in brake and suspension fittings, hose seals, retaining clips, hub pawls and springs. Each shape has a role, with straight picks lifting, angled picks turning corners inside fittings, and hooks pulling parts toward you.
Which pick shapes matter most for seal work?
A straight pick and a 90-degree pick cover most seals, because one slides under a flat seal edge and the other reaches an O-ring seated in a groove. A full hook earns its place for springs and retaining rings. Sets such as the TEKTON PNH90102 add compound and 45-degree tips for parts seated at an angle to the opening.
When does a workshop need a long pick set?
When the part sits deeper than a standard pick can reach: down fork legs, inside hub shells, along internal cable routes and behind bottom brackets. Long sets such as the GEARWRENCH 84020H and the ROTATION six-piece keep your hand clear of the opening and add the shaft strength that pulling stuck hoses and deep seals demands.
Can a pick damage a seal seat?
Yes, if it is forced. A pick tip is harder than the aluminium and plastic seats most bike seals sit in, so levering from one point or digging at an angle can score the surface the seal must close against. Working the tip under the seal gradually, walking around the part and keeping the point on the seal rather than the seat avoids that damage.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Bike Pick Sets: Top Gear Picks For…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.