Key takeaways
- Best bike pedal assist sensors for ebike builds: 12-magnet cadence discs, dual-hall crank sensors and a torque bottom bracket, with plug and fit notes.
A pedal assist sensor is the part that tells an e-bike controller when you are pedalling, and on torque models, how hard. Without one, a conversion kit has no way to meter motor help in step with your legs: the motor either waits for a throttle or runs blind. Whether you are building a kit bike, repairing a factory e-bike, or replacing a cracked magnet disc, this small part decides how natural the whole bike feels.
As an Amazon Associate, I earn from qualifying purchases.
The five sensors below cover the two families on sale as separate parts. Four are cadence sensors, which read crank rotation through a magnet disc or a crank-mounted pickup and send pulses to the controller. One is a torque-sensing bottom bracket axle, which measures pedalling force and suits riders who want assistance that rises and falls with effort.
What A Pedal Assist Sensor Actually Does
A cadence PAS has two halves. A disc or ring carrying magnets turns with the cranks, and a fixed sensor head reads each magnet as it passes. The controller counts those pulses to confirm the pedals are turning and to judge how fast, then feeds in the assist level you selected. More magnets per revolution means more pulses per turn, so the controller notices pedalling sooner and cuts power sooner when you stop.
A torque sensor works differently. It sits inside a bottom bracket axle and measures the twist your legs apply, sending a signal that grows with pedalling force. The controller answers with proportional help: push harder on a climb and assistance rises, ease off and it fades. That is why torque units fit fewer systems and are usually bought as replacements for a matching motor family rather than as universal add-ons.
What To Look For In A Pedal Assist Sensor
Start with magnet count. Discs in this group carry 12 magnets, a pulse every 30 degrees of crank rotation. Older five- and eight-magnet discs respond more slowly, and if you swap to a different count, the KT D12 listing below notes that the display’s PAS parameters need adjusting to match, because the controller reads pulses against the count it expects.
Mounting style comes next. A disc slides onto the bottom bracket spindle and needs the sensor head aligned within a few millimetres of the magnets. A crank-mounted sensor such as the KT-V12L pattern skips the disc and reads a magnet ring at the crank, suiting builds where spindle space is tight. A torque bottom bracket replaces the whole axle, so shell width and axle length must match your frame and motor.
Then check the connector. The common choices are the three-pin SM plug, a bare lead, and moulded waterproof plugs in the Julet style. Listings name the variant in the title or option selector, and ordering the wrong one means splicing wires. Cable length matters too: leads run from about a metre on the cadence discs to a short 6-pin harness on the torque axle.
1. Fafeims 12-Magnet Steel PAS Disc Sensor
Fafeims sells this unit as a complete pedal assist set for conversion kits: a steel magnet disc, a steel ring and the sensor head on a lead of about 1.1 metres. The disc carries 12 magnets across about 65 mm, with a 35 mm steel ring, and the assembly weighs about 50 g per the listing.
The listing describes a dual magnetic loop design in which the Hall sensor reads the passing magnets and converts that into the signal the controller uses, and it states 1:1 power assist. The maker positions it as compatible with the electric bike kits on the market generally, making it the straightforward replacement when a kit’s original disc cracks or its sensor head fails and the controller expects a standard three-wire PAS input.
Choose it for a conventional hub-motor conversion with room for a 65 mm disc at the spindle, where a long cable run to a frame-mounted controller helps.
Specs
- Brand: Fafeims
- Part number: Fafeimsea29mg617q
- Sensor type: Cadence PAS, dual magnetic loop Hall design per listing
- Magnets: 12
- Disc diameter: Approx. 65 mm
- Steel ring diameter: Approx. 35 mm
- Cable length: Approx. 1.1 m
- Material: Steel
- Weight: Approx. 50 g
2. KT D12 Pedal Assist Sensor
The KT D12 is the disc sensor built for the KT controller ecosystem, the display and controller family fitted to a large share of conversion kits. It uses 12 magnets, installs on the left side of the bottom bracket per the listing, and this variant terminates in an SM plug.
Its listing carries two pieces of guidance worth repeating. First, if you have used a PAS with five, eight or ten magnets before, the PAS parameters on the display need adjusting when you change to this 12-magnet unit. Second, on a KT display the C1 parameter should be set to a value of 7 for this sensor. Those notes make it the best documented pick here for anyone already running KT electronics who wants a like-for-like swap.
Specs
- Brand: Generic (KT pattern)
- Model: KT D12
- Sensor type: Cadence PAS
- Magnets: 12
- Mounting side: Left side, per listing
- Connector: SM plug (this variant)
- Material: Alloy steel
- Display setting: C1 value 7 on KT displays, per listing
3. Frdhee KD-2PS-L Dual Hall Pedal Assist Sensor
Frdhee’s KD-2PS-L takes the same 12-magnet cadence job and builds the sensor around a dual Hall arrangement, which the listing describes as a multifunctional dual Hall pedal sensor. Two Hall elements reading the same magnet ring give the controller a cleaner read on rotation and direction than a single element, the detail to want if a build has suffered from assist that surges or lingers.
The listing publishes a measuring range of 20 to 120 RPM, which brackets the cadence band most riders pedal in. The housing is polycarbonate rather than steel, in a bicycle mount format that fixes the sensor at the bottom bracket area while the disc turns with the cranks.
This is the pick for a builder who wants a named model with a published operating range instead of a generic disc, and who is comfortable confirming the wire order against their controller before the first ride.
Specs
- Brand: Frdhee
- Model: KD-2PS-L
- Sensor type: Dual Hall cadence PAS, per listing
- Magnets: 12
- Measuring range: 20 to 120 RPM
- Mounting type: Bicycle mount
- Material: Polycarbonate
- Part number: 06
4. HUDAMZKY KT-V12L Crank-Mount Pedal Assist Sensor
The KT-V12L pattern takes a different route to the same signal. Instead of a loose disc on the spindle, the V12L family mounts at the left crank, and HUDAMZKY’s listing leads with easy crank installation: the sensor and its magnet arrangement fit at the crank arm, avoiding a bottom bracket teardown on builds where the spindle is crowded.
This variant carries the SM plug in black, per the listing, and the package contains the sensor itself. The listing records the material as metal and the item weight as 0.03 kg, a minimal addition at the crank.
Reach for this pattern when a disc will not fit your bottom bracket, when you want the sensor reachable for adjustment without removing cranks and cups, or when adding pedal assist to a throttle-only kit whose controller has a PAS input waiting.
Specs
- Brand: HUDAMZKY
- Model: KT-V12L (V12-L)
- Sensor type: Cadence PAS, crank mounted
- Connector: SM plug (Black Plug variant)
- Included: Ebike pedal assist sensor
- Material: Metal
- Item weight: 0.03 kg
- UPC: 797241451684
5. Shophubio Drive Torque Sensor Bottom Bracket
The Shophubio unit is the torque option, and a different class of part: a complete bottom bracket axle with the torque sensor built in, sold as a replacement for the SR PA231.32.ST.C pattern used by Bafang series motors. The listing gives a 73 mm opening width and a 148 mm axle length, notes that it fits 68 mm frames with an additional washer, and puts the weight at about 350 g per set.
Because it reads pedalling force at the axle, the ride it produces is the proportional kind described earlier. Bafang’s dealer documentation for the SR PA231.32.ST.C family describes a torque signal range of 0 to 80 N.m alongside a 32-pulse speed signal, the data the matching controller blends. The connector is a 6-pin cable, and the listing is explicit about scope: this sensor is tailored for series motors only and cannot be used with center motors or incompatible torque controllers.
Buy it to restore torque sensing on a compatible Bafang-series build with a failed axle sensor, not as a universal upgrade, and confirm your motor and controller speak the same protocol first.
Specs
- Brand: Shophubio
- Model: Drive Torque Sensor, SR PA231.32.ST.C replacement
- Sensor type: Torque-sensing bottom bracket axle
- Bottom bracket width: 73 mm (fits 68 mm frames with washer, per listing)
- Axle length: 148 mm
- Connector: 6-pin cable
- Weight: About 350 g per set, per listing
- Compatibility: Series motors only, per listing
How To Choose Between These Five
Match the sensor to the controller first and the frame second. KT electronics point to the KT D12, whose listing publishes the exact display parameter the system expects. A generic controller with a three-wire PAS input takes the Fafeims disc or the Frdhee dual Hall unit, the Frdhee ahead when you want a stated RPM range. If the bottom bracket has no room for a disc, the crank-mounted HUDAMZKY V12L pattern solves the packaging problem. And if your build runs a compatible Bafang series motor with torque control, the Shophubio axle is the only pick here that changes how the assist feels rather than simply restoring it.
Whichever you choose, set the display’s PAS parameters to the magnet count you fitted, keep the sensor head gap small and even, and confirm the plug variant in the listing title matches your harness.
FAQ
What is the difference between a cadence and a torque pedal assist sensor?
A cadence sensor counts crank rotation through passing magnets and tells the controller that you are pedalling, and roughly how fast. A torque sensor measures the force you apply at the axle and lets the controller scale assistance to your effort. Cadence units fit most controllers and dominate conversion kits; torque units feel more natural and are usually tied to a specific motor family.
How many magnets should a pedal assist disc have?
More magnets give the controller more pulses per crank revolution, so assist starts and stops sooner. All four cadence picks use 12 magnets, a pulse every 30 degrees of rotation, the common count for conversion kits. If you replace a disc with a different count, adjust the PAS settings on your display to match, as the KT D12 listing instructs.
Can I add a pedal assist sensor to a kit that only has a throttle?
Often, yes, provided the controller has a PAS input and the display supports pedal assist levels. The cadence models here are three-wire devices, and the work is mounting the unit, routing the cable and setting the display parameters. If the controller has no PAS input, no sensor alone will add the function, so check its wiring diagram first.
Does the plug type on a PAS sensor matter?
It does. The sensor, controller and display must agree on the connector and the wire order behind it. Listings here include an SM plug variant; other listings in these families offer moulded waterproof plugs instead. A mismatched plug can be adapted with splicing, but ordering the variant your harness already uses keeps the install clean.
Conclusion
For most conversion builds, the KT D12 and the Fafeims disc cover the job with published settings and standard fittings, the Frdhee adds dual Hall sensing with a stated RPM range, and the HUDAMZKY V12L solves the no-room-at-the-spindle problem at the crank. The Shophubio torque axle stands apart as the one replacement that restores force-based assist on compatible Bafang series systems.
FAQ
What is the difference between a cadence and a torque pedal assist sensor?
How many magnets should a pedal assist disc have?
Can I add a pedal assist sensor to a kit that only has a throttle?
Does the plug type on a PAS sensor matter?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




