Key takeaways
- Compare the best road bike pedals across the SPD-SL and Keo systems, with cleat float, platform size, stack height, weight and box contents explained.
Road pedals look like a small purchase, but the system you pick decides which shoes you can wear, how far your foot can rotate while clipped in, and how solid the bike feels when you stand out of a corner. The five pedals in this guide all bolt to a three-bolt road shoe, yet they split into two camps that never mix: Shimano SPD-SL and Look Keo. A cleat from one system will not engage a pedal from the other, so the first decision is which family your shoes and riding style belong to. Three SPD-SL pedals below cover the Shimano ladder from a forgiving first road pedal to a carbon pro-level model, and two Keo pedals do the same job on the Look side. Every model here ships with a set of cleats in the box, so each one is a complete system ready to fit. As an Amazon Associate, I earn from qualifying purchases.
Cleat Systems Decide Everything
SPD-SL and Keo both use a wide triangular plastic cleat held by three bolts, and both put the spring mechanism in the pedal body. The shapes are different enough that there is no cross-compatibility in either direction, and neither system works with two-bolt SPD shoes or cleats. If you already own road shoes with cleats fitted, buy pedals from the same system and the swap takes minutes. If you are building a setup from nothing, both systems work well; Shimano has the wider network of compatible third-party cleats, while Look’s Keo Grip cleats carry a rubber walking surface that helps during cafe stops.
Float, the amount your heel can swing side to side while clipped in, is set by cleat choice in both systems. Shimano colour-codes its SPD-SL cleats: yellow gives 6 degrees, blue gives 2 degrees, and red fixes the foot at 0 degrees. Look uses the same idea, with grey Keo cleats at 4.5 degrees, black at 0 degrees and red at 9 degrees. Every pedal in this guide includes the middle-float cleat, which suits the majority of riders.
Float, Tension and Stack Height
New clipless riders and anyone with sensitive knees usually get on best with more float, because the foot can find its own angle instead of being locked into one position. All five pedals here also offer entry and release tension adjustment, turned with a small hex key or screw on the pedal body. Setting the tension low makes unclipping at junctions far less stressful while you learn, and it can be wound up later for sprinting.
Stack height is the distance from the centre of the pedal axle to the sole of the shoe. A lower stack puts your foot closer to the axle, which many riders feel as a more direct connection. The figures below are quoted with cleats fitted where the maker states them. All five pedals are single-sided: the weighted body hangs so the binding faces up and back, ready for your toe to find it. That is the normal road arrangement, and it becomes automatic after a few rides.
Fitting and Setup Basics
All five pedals thread into standard 9/16 inch crank arms, with the left pedal using a reverse thread, and all five fit with a pedal wrench or a hex key through the back of the axle depending on the model. Grease the threads lightly before fitting so the pedals can be removed again later. Cleat position matters as much as pedal choice: the usual reference point places the pedal axle under the ball of your foot, and both cleat systems allow fore-aft and sideways adjustment on the shoe before the bolts are fully tightened. Set the release tension to its softest setting for your first rides, stand over the bike and practise clipping in and out while holding a wall, then add tension gradually once the motion feels natural. Cleats are wear parts in both systems; when the plastic edges round off or engagement starts to feel vague, a fresh set restores the original feel for far less than new pedals.
1. Shimano PD-RS500
The PD-RS500 is Shimano’s entry point into SPD-SL, built around a resin body with an extra-wide platform and a larger entry target than the racier pedals in the range. Its spring tension is lighter than the settings on the 105 and Ultegra models, which makes it the easiest Shimano road pedal to clip out of while you are learning the motion. Tension is still adjustable, so the hold can be firmed up as your confidence grows. A sealed cartridge axle unit keeps the bearings protected and the maintenance schedule simple. At 330 grams per pair it gives away weight to the carbon models, but the platform shape and cleat interface are the same ones used higher up the Shimano line, and the included SM-SH11 cleats provide the forgiving 6-degree float most new road riders want.
Specs
- Cleat system: Shimano SPD-SL, 3-bolt
- Cleats included: SM-SH11, 6-degree float
- Body material: Resin
- Spindle: Chromoly steel, 9/16 inch thread
- Binding: Single-sided, adjustable entry and release tension
- Weight: 330 g per pair
- Model: EPDRS500
2. Shimano PD-R550
The PD-R550 sits in Shimano’s range as a training-grade SPD-SL pedal with a resin composite body and stainless steel tread plates where the cleat bears on the pedal. Those plates slow down body wear and keep the platform feeling consistent over high mileage. The platform is extra wide, and the bearings are placed wide apart to spread pedalling load evenly across the shoe. It trims the pair weight to 310 grams, and like the RS500 it arrives with SM-SH11 cleats in the box, so the float is the same relaxed 6 degrees. Release tension adjusts with a small hex key at the back of the binding. For riders who want a Shimano road pedal that shrugs off daily training and winter miles without moving to a carbon body, the R550 is the sensible middle step.
Specs
- Cleat system: Shimano SPD-SL, 3-bolt
- Cleats included: SM-SH11, 6-degree float
- Body material: Resin composite with stainless steel tread plates
- Stack height: 16.5 mm
- Binding: Single-sided, adjustable entry and release tension
- Weight: 310 g per pair
- Model: EPDR550L
3. Shimano Ultegra PD-R8000
The PD-R8000 is the pro-level SPD-SL pedal in this lineup, with a carbon composite body, an extra-wide platform and a stainless steel body plate for the cleat to work against. It is the lightest pedal here at 248 grams per pair, and Shimano shaped the body for a low stack height, 0.7 mm lower than the PD-6800 it replaced. Wide bearing placement and sealed cartridge bearings keep the axle turning smoothly under load, and entry and release tension is adjustable at both ends of the binding. The box includes SM-SH11 cleats with 6 degrees of float. Shimano also sells a version of this pedal with a 4 mm longer axle for riders who prefer a wider stance; the listing linked here is the standard axle model, so check the variant before ordering if stance width matters to you.
Specs
- Cleat system: Shimano SPD-SL, 3-bolt
- Cleats included: SM-SH11, 6-degree float
- Body material: Carbon composite with stainless steel body plate
- Q-factor: 53 mm, standard axle
- Binding: Single-sided, adjustable entry and release tension
- Weight: 248 g per pair
- Model: IPDR8000
4. Look Keo Classic 3
The Keo Classic 3 is Look’s entry road pedal, pairing a composite body with a chromoly spindle. The contact area measures 400 square millimetres on a 60 mm wide platform, which gives a stable base for riders moving up from flat pedals. Spring retention adjusts from 8 to 12, so the release can be set soft while you learn and tightened later. Each pedal runs on a ball bearing and a needle bearing cartridge, a layout Look uses across the Keo range. The pedals ship with grey Keo Grip cleats giving 4.5 degrees of float, and the Grip cleat’s rubber surface makes short walks on smooth floors less slippery than a plain plastic cleat. At 140 grams per pedal it is light for an entry model, and it is the natural first step into the Keo system.
Specs
- Cleat system: Look Keo, 3-bolt
- Cleats included: Keo Grip, grey, 4.5-degree float
- Body material: Composite
- Spindle: Chromoly steel
- Platform area: 400 mm²
- Stack height: 17.8 mm with cleats
- Tension: Adjustable, 8 to 12
- Weight: 140 g per pedal
- Model: PEKC15837
5. Look Keo 2 Max Carbon
The Keo 2 Max Carbon moves the 2 Max design into a carbon body and adds a stainless steel contact plate, growing the platform to 500 square millimetres at 60 mm wide. That bigger, harder-wearing surface is the main reason to step up from the Classic 3: it supports the shoe more firmly through the pedal stroke and resists cleat wear on the pedal body. The oversized chromoly+ spindle runs on steel bearings, retention adjusts from 8 to 12, and the stack height drops slightly to 17.3 mm with cleats fitted. Weight falls to 125 grams per pedal. Grey Keo Grip cleats with 4.5 degrees of float are included, and the pedal also accepts Look’s fixed black and 9-degree red Keo cleats if you later want a different float feel.
Specs
- Cleat system: Look Keo, 3-bolt
- Cleats included: Keo Grip, grey, 4.5-degree float
- Body material: Carbon
- Platform: Stainless steel plate, 500 mm², 60 mm wide
- Spindle: Chromoly+
- Stack height: 17.3 mm with cleats
- Tension: Adjustable, 8 to 12
- Weight: 125 g per pedal
- Model: PEK2M16090
Which Pedal Fits Your Riding
If these are your first clipless road pedals, the PD-RS500 and the Keo Classic 3 are the friendliest places to begin, thanks to their light release settings and included mid-float cleats. Riders stacking up training miles who want metal wear surfaces without a carbon body should look at the PD-R550. The Ultegra PD-R8000 and the Keo 2 Max Carbon are the performance picks: both cut weight, widen the platform and keep full tension adjustment, and the choice between them mostly comes down to which cleat system your shoes already carry. Whichever way you go, keep the pedals and cleats from one system together, because mixing SPD-SL and Keo parts never works.
Frequently Asked Questions
Do road bike pedals come with cleats?
All five pedals in this guide include a set of cleats in the box: Shimano’s SM-SH11 for the three SPD-SL models and grey Keo Grip cleats for the two Look models. Replacement cleats are sold separately once the originals wear, and they must match the pedal system exactly.
Can I use SPD-SL cleats with Look Keo pedals?
No. Both systems use three bolts, but the cleat shapes, spring interfaces and release geometry are different, so an SPD-SL cleat will not engage a Keo pedal and a Keo cleat will not engage an SPD-SL pedal. The same applies to two-bolt SPD cleats, which fit neither system.
How much float do I need?
Most riders do well on the included cleats, which give 6 degrees of float in the Shimano models and 4.5 degrees in the Look models. If your knees complain on long rides, more float usually helps; if you want your feet held in one exact position, both systems offer fixed 0-degree cleats as separate purchases.
Are road pedals single-sided or double-sided?
The five pedals here are single-sided, which is the standard road design: the weighted rear of the pedal hangs down so the binding presents itself to your shoe as you push off. Dual-sided entry exists on the Speedplay system and on two-bolt SPD pedals, which are covered in other guides on this site.
FAQ
Do road bike pedals come with cleats?
Can I use SPD-SL cleats with Look Keo pedals?
How much float do I need?
Are road pedals single-sided or double-sided?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




