Updated Nov 19, 2026· 5 min read

Key takeaways

  • The DR. Infrared Heater DR-910F is a 10,000-watt, 240-volt hardwired shop heater with a remote thermostat. Read specs and install rules before buying.

The DR. Infrared Heater DR-910F is a 10,000-watt, 240-volt hardwired heater built for shops and garages. It mounts on a wall or ceiling, runs on a dedicated 240-volt circuit, and comes with a remote-controlled thermostat and five adjustable louvers. This review covers the DR-910F sold under ASIN B01M276DQJ. One note up front: no direct Amazon ASIN-field snippet surfaced for this ASIN, so the details below rest on the published owner’s manual and listing reproductions.

The headline facts are the output and the install. Ten thousand watts is serious heat for a large shop, and it is also the reason this heater is hardwired, needs a 60-amp breaker, and must be installed by a licensed electrician. The manual also carries a clear warning: this is not a residential or household heater.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The DR-910F is a fixed, hardwired 10,000-watt shop heater for large garages and workshops with a proper 240-volt circuit. Its remote thermostat, five adjustable louvers, and wall or ceiling mounting make it a fit-and-forget heat source for a working shop. It is not a plug-in heater, not a portable heater, and not a home heater, so buyers should confirm the electrical work and the space before ordering.

Key Specs

Specification Detail
Brand DR. INFRARED HEATER
Model DR-910F
Power 10,000 watts
Voltage 240 volts, 60 Hz, single phase
Heat output 34,129 BTU
Mounting Wall or ceiling, brackets included
Thermostat Remote controlled, 50 to 90 degrees Fahrenheit
Thermostat options Inside thermostat or wall thermostat switch
Louvers 5 adjustable louvers, tilt adjustable knob
Safety listing UL/CUL listed
Timer Built-in timer
Motor Heavy-duty fully enclosed motor
Electrical Hardwired, 60-amp dual-pole breaker, 6 AWG copper wire
Heating capacity 1.25 watts per cubic foot
Warranty One-year limited component warranty
Color Not stated
Item dimensions Not stated
Item weight Not stated
UPC Not stated
ASIN B01M276DQJ

Check price on Amazon

The 34,129 BTU figure is the published heat output for the 10,000-watt element, and the 1.25 watts per cubic foot figure is the manufacturer’s own sizing guide for the volume of the space. The remote covers 50 to 90 degrees Fahrenheit, and the manual states a factory setting of 70 degrees Fahrenheit. The box holds the heater, the owner’s manual, a warranty card, a heater handle, and the mounting bracket with M10 hardware.

Item dimensions, item weight, and color are marked not stated because no published source confirmed them for this exact listing. Gray and white versions of the DR-910F appear in retailer listings, so the color behind this ASIN should be confirmed on the listing. The dimensions and weight figures that appear in some sources belong to the cart-mounted DR-910M, a different listing, and were not used here.

Who It’s For

The DR-910F suits a large garage, workshop, or warehouse where heat is needed all winter and floor space is too valuable to give up to a portable heater. Because it mounts on a wall or ceiling, it stays out of the work area, and the five louvers let the airflow be aimed at the bench or the bay that needs it most.

It also suits a buyer who already has, or is willing to add, a proper 240-volt circuit, since the hardwired design means no cord to trip over and no outlet to share.

Who Should Skip It

Anyone without a 240-volt circuit should skip this heater. It cannot run on a standard household outlet, and the manual requires installation by a certified or licensed electrician.

Anyone heating a living space should also skip it. The manual warns of a risk of fire and states plainly that the DR-910F is not a residential or household heater, so it does not belong in a bedroom, living room, or any finished living area.

How It Compares with Typical Alternatives

A plug-in portable space heater is the most common alternative, and the difference is mostly about scale. Portable heaters run on a standard outlet, need no electrician, and move wherever they are needed, but their output is far lower and they suit a small room rather than a whole shop.

Smaller hardwired shop heaters are the closer comparison. Models in the 7,500-watt class, such as the DR-975, share the same install style, the same wall or ceiling mounting, and the same remote thermostat idea, with less output for a smaller shop.

The cart-mounted version of this same heater is another alternative worth knowing about. It carries the same 10,000-watt core on a wheeled cart, so it can be rolled around a large shop, while the DR-910F is fixed in place. Buyers should match the model number to the form they want.

Gas and propane shop heaters are the remaining alternative. They need no 240-volt circuit, which suits a shop without spare panel capacity, but they bring fuel handling and combustion venting into the picture, which an electric hardwired heater avoids. One roundup notes hardwired fan heaters of this class can be audible, but the manual publishes no noise figure.

Frequently Asked Questions

Does the DR-910F need an electrician?

Yes. The heater is hardwired to a 240-volt circuit on a 60-amp dual-pole breaker with 6 AWG copper wire, and the manual states that it must be installed by a certified or licensed electrician in line with local codes. The unit should be mounted at least 6 feet from the floor and no closer than 1 foot from any adjacent surface or wall.

Can the DR-910F heat a house or living room?

No. The manual warns of a risk of fire and states that the heater must not be used as a residential or household heater. It is built for shops, garages, warehouses, and similar commercial or work spaces, and it should not be installed in a bedroom, living room, or any finished living area.

What temperature range does the thermostat cover?

The remote-controlled thermostat covers 50 to 90 degrees Fahrenheit, according to retailer listings for this model, and the manual states a factory setting of 70 degrees Fahrenheit. A rocker switch on the rear selects the inside thermostat or a wall thermostat, and the optional DR-001 wall thermostat is sold separately.

What is the difference between the DR-910F and the DR-910M?

The DR-910M is the cart-mounted version of the same 10,000-watt heater, while the DR-910F is the fixed wall or ceiling mounted version. The two are separate listings, so buyers should match the model number to the form they want.

Final Verdict

The DR-910F is a straightforward proposition: a large, fixed, hardwired heater for a large shop with a proper 240-volt circuit. Its strengths are the 10,000-watt output, the remote thermostat, the five adjustable louvers, and a mount that keeps it out of the work area. Its limits are just as clear: it needs an electrician, a 60-amp breaker, and a shop or garage setting, and it is not a residential heater. Confirm model DR-910F and ASIN B01M276DQJ on the listing before ordering.

M
Mike Sullivan
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Does the DR-910F need an electrician?
Yes. The heater is hardwired to a 240-volt circuit on a 60-amp dual-pole breaker with 6 AWG copper wire, and the manual states that it must be installed by a certified or licensed electrician in line with local codes. The unit should be mounted at least 6 feet from the floor and no closer than 1 foot from any adjacent surface or wall.
Can the DR-910F heat a house or living room?
No. The manual warns of a risk of fire and states that the heater must not be used as a residential or household heater. It is built for shops, garages, warehouses, and similar commercial or work spaces, and it should not be installed in a bedroom, living room, or any finished living area.
What temperature range does the thermostat cover?
The remote-controlled thermostat covers 50 to 90 degrees Fahrenheit, according to retailer listings for this model, and the manual states a factory setting of 70 degrees Fahrenheit. A rocker switch on the rear selects the inside thermostat or a wall thermostat, and the optional DR-001 wall thermostat is sold separately.
What is the difference between the DR-910F and the DR-910M?
The DR-910M is the cart-mounted version of the same 10,000-watt heater, while the DR-910F is the fixed wall or ceiling mounted version. The two are separate listings, so buyers should match the model number to the form they want.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
DR. Infrared Heater DR-910F Review: Shop Heat GuideCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.