Updated Nov 21, 2026· 9 min read

Key takeaways

  • The best anti theft skewers for bike wheels swap quick releases for keyed, hex and gravity locks. Five verified sets compared, with fit notes for QR hubs.

A quick-release skewer is built for speed, and that cuts both ways. Flip a lever, spin the nut, and a wheel lifts out of the dropouts in seconds, wonderful at a trailhead, terrible outside a station rack. Locking skewers solve the second half of that problem. They replace the lever skewer with hardware that opens only with a coded key, a non-standard tool, a plain hex key, or not at all while the bike stands upright.

Our top pick: Pinhead Bicycle Locking Skewer Set. Runner-up: Delta Hublox Security Skewers.

As an Amazon Associate, I earn from qualifying purchases.

This roundup covers five anti theft skewer and axle sets sold on Amazon: a uniquely keyed set from Pinhead, two Delta Cycle systems built around a special key and a simple bolt-on, a budget hex-head set from Wileosix, and Kryptonite gravity nuts for solid axles. One honesty note belongs up front: every set here fits quick-release or solid-axle hubs. None fits a thru-axle bike, and the buying guide explains what thru-axle riders need instead.

Buying guide: what to check before you order

Match the set to your axle type

Locking skewers are not universal. Most replace the hollow quick-release skewers found on older mountain bikes, hybrids and commuters, where a thin rod passes through the hub axle. A second group, represented here by the Kryptonite WheelNutz, replaces the nuts on solid axles, found on many single-speeds, hub-gear bikes and older machines. Measure what you have before ordering: a skewer set cannot fit a solid axle, and a nut set cannot fit a hollow one.

Thru-axle bikes are a separate world. A thru axle threads directly into the fork or frame, and its diameter, thread pitch and length all have to match the bike exactly. If your wheels use thru axles, skip every product in this article and look for locking thru axles made in your bike’s exact format. Fitting a quick-release product to a thru-axle hub is not possible.

Check skewer length against your dropout spacing

Front quick-release hubs are commonly spaced at 100 mm and rear hubs at 130 mm or 135 mm, and a replacement skewer has to be long enough to pass through the hub and both dropouts with thread to spare. Match any length or spacing a listing states to your hub; where none is stated, measure your current skewer from under the head to the end of the thread before you buy.

Choose a locking method you can live with

Uniquely keyed systems, like the Pinhead set below, give each owner a different key pattern, so another rider’s key will not open your wheels. Non-standard tool systems, like Delta Hublox, use one special wrench shape across the range: less exclusive, but the tool is not sitting in every multi-tool. Bolt-on skewers such as Delta Axlerodz and the Wileosix set simply delete the lever and close with a hex key, stopping grab-and-go theft but not a prepared thief. Gravity systems from Kryptonite need no key at all: an internal pin blocks removal while the bike is upright.

Plan for the flat tyre far from home

Every locking method adds a step to wheel removal. If your set uses a key or a special wrench, carry it on every ride, taped under the saddle or in the repair kit, and record any key code somewhere safe at home. A wheel you cannot remove at the roadside turns a ten-minute tube swap into a long walk.

The five sets, compared

1. Pinhead Bicycle Locking Skewer Set

Pinhead is the name most riders meet first in this category, and this listing covers both wheels plus the seat in one box. The set includes a front wheel locking skewer, a rear wheel locking skewer and a seat lock, all worked by the same coded key, so one small tool on your key ring secures the parts a thief can otherwise lift in moments.

The listing positions the set squarely at everyday security: its stated uses are securing wheels during bicycle storage and preventing wheel theft during bicycle commuting. A keyed skewer will not stop power tools, but it removes the silent, tool-free theft that quick releases invite, without adding a cable or second lock to your routine. For a commuter bike that sleeps in a rack all day, this is the benchmark set in the roundup.

Specs

    • Brand: Pinhead
    • Model number: PH-111
    • Set contents: 3 skewers (front wheel, rear wheel and seat)
    • Axle type: hollow quick-release axles
    • Locking method: coded key, unique to the set

    2. Delta Hublox Security Skewers

    Delta Cycle takes a simpler route with Hublox. The pair replaces standard quick-release skewers and locks and unlocks with a special key that is small enough to live on a key ring. The opposite end of each skewer is rounded, leaving nothing for pliers to grip and turn.

    The axle is anti-rust Cromoly and the springs are stainless steel, and the pair weighs 70 grams, close enough to ordinary skewers that you will not feel the swap. Hublox uses one key pattern for the range rather than a unique code per set, which is the honest compromise at this level: it defeats bare hands and common tools. For bikes parked in lower-risk spots, that balance is often the right one.

    Specs

      • Brand: Delta Cycle
      • Model name: Hublox Security Skewers
      • Set contents: front and rear skewer pair with special key
      • Axle: anti-rust Cromoly, stainless steel springs
      • Weight: 70 grams per pair
      • Locking method: included special key

      3. Delta Axlerodz Bolt-On Bicycle Skewers

      Axlerodz is Delta’s bolt-on answer. There is no lever and no special key: each skewer bolts down with a 5 mm hex key, the tool already in every saddle pack. That makes Axlerodz the weakest barrier here against a prepared thief, and Delta’s own positioning matches that: added security rather than a lock in its own right.

      What you get in return is simplicity. The Cromoly axle, stainless springs and silver alloy end caps come to 69 grams for the set, installation is a straight swap for your existing skewers, and wheel removal on the road needs nothing you do not already own. On a bike rarely left alone for long, or as one layer alongside a proper frame lock, Axlerodz removes the single easiest theft on the bike: the tool-free kind.

      Specs

        • Brand: Delta Cycle
        • Model number: TD9100
        • Set contents: 1 pair of bolt-on skewers
        • Axle: Cromoly, stainless springs, silver alloy end caps
        • Weight: 69 grams for the set
        • Locking method: bolt-on, 5 mm hex key

        4. Wileosix Hex Locking Skewer Set

        The Wileosix set follows the same bolt-on logic as Axlerodz with an M5 hex head design. The skewers are sold as a non quick-release set: the lever goes away, a hex head takes its place, and a wheel can only come off once someone produces the matching hex key to unthread it.

        Listing detail for this set is thinner than for the Delta and Pinhead products, so treat it as the no-frills option it is. There is no coded key, no unique pattern and no gravity trick, just a locking skewer set at the simple end of the market. If your current setup is a bare quick release and the bike is locked in busy, overlooked places for short stops, a hex-head set still closes the easiest gap in your security for very little fuss.

        Specs

          • Brand: Wileosix
          • Model number: non QR skewer, as listed
          • Set contents: hex locking skewer set for front and rear wheels
          • Head type: M5 hex head
          • Locking method: bolt-on hex head, no quick-release lever

          5. Kryptonite Gravity WheelNutz (M9)

          The WheelNutz are the odd ones out here, because they are nuts, not skewers. They are locking nuts for solid axles, included because solid-axle bikes need wheel security too and a skewer-only roundup would leave those riders out. This M9 version, model 001768, fits the front solid axles found on many single-speed, fixed-gear and hub-gear bikes, and the same line is made in M10 and 3/8 inch sizes for other axles.

          A gravity pin inside each nut blocks it from turning while the bike stands upright, so the nut can only be loosened with a 15 mm wrench once the bike is flipped upside down, something a thief cannot do to a bike locked by its frame. No key exists to lose. Kryptonite describes the Gravity line as a secondary security solution, and that is the right expectation: pair the nuts with a real frame lock, and the wheels stop being the soft target. The product manual lists an alloy steel build, a weight of about 81 grams per set and a lifetime warranty.

          Specs

            • Brand: Kryptonite
            • Model: 001768 (M9)
            • Fit: solid axles, M9 size; the line also covers M10 and 3/8 inch
            • Locking method: gravity pin, releases only with the bike upside down
            • Tool required: 15 mm wrench
            • Material: alloy steel

            Key factors to weigh

            Security level versus daily convenience. Rank the five plainly: the coded Pinhead key and the Kryptonite gravity pin resist the widest range of casual attacks, the Hublox special key sits one step below, and the two hex bolt-on sets mainly delete the lever. Match the level to how long the bike sits unattended and where.

            Coverage beyond the wheels. The Pinhead set adds a seat lock in the same box and on the same key, which matters because a saddle and seatpost can be worth as much as a front wheel. With the other sets, budget separately for seat security if your post uses a quick release.

            Weight and weather. Every set here sits between roughly 69 and 81 grams, so weight is a non-issue. Weather resistance matters more: Cromoly axles with an anti-rust finish and stainless springs, as on both Delta sets, suit bikes that live outdoors, and any set benefits from greased threads at installation.

            Key management. A unique key is only an advantage while you have it. Note the key code when the set arrives, store a photo of it, and carry the key or tool on the bike. Gravity nuts remove this concern entirely.

            Frequently asked questions

            Do locking skewers fit thru-axle mountain bikes?

            No. Every set in this roundup is made for quick-release hubs or, in the Kryptonite case, solid axles. A thru axle is part of the fork and frame interface, with its own diameter, length and thread pitch, so a bike with thru axles needs locking thru axles in that exact format. Check your axle type first.

            What happens if I lose the key for a keyed skewer set?

            That depends on the system. A coded set such as Pinhead ties replacement keys to the code supplied with the set, so record it somewhere safe on day one. Sets that use a shared special tool, like Hublox, are simpler to rescue because the tool is standard across the range. Without any key or tool, removal becomes a bike-shop job.

            Are gravity lock nuts as secure as keyed skewers?

            They solve the same problem differently. Gravity nuts cannot be turned while the bike stands upright, the position a locked bike sits in, and there is no key to copy or lose. Keyed skewers protect hollow quick-release axles, which gravity nuts cannot fit. Choose by your axle type first; both approaches are aimed at opportunistic theft, not power tools.

            Do I still need a regular lock with locking skewers fitted?

            Yes, always. Locking skewers and nuts secure wheels to the frame, and nothing more. They do not stop anyone carrying the whole bike away, so the frame still needs a proper lock through it and around a fixed object. Skewers are the second layer, protecting the parts your main lock cannot reach.

            Conclusion

            Anti theft skewers are the cheapest meaningful security upgrade a quick-release bike can get, because they remove the only major components that come off with no tools at all. Choose the Pinhead set for a uniquely coded key across wheels and seat, Hublox for a light special-key pair, Axlerodz or the Wileosix set for simple hex bolt-on convenience, and the Kryptonite WheelNutz if your bike runs solid axles. Confirm your axle type and spacing first, keep the key with the bike, and let a real frame lock do the heavy work.

            M
            Mike Sullivan
            We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

            FAQ

            Do locking skewers fit thru-axle mountain bikes?
            No. Every set in this roundup is made for quick-release hubs or, in the Kryptonite case, solid axles. A thru axle is part of the fork and frame interface, with its own diameter, length and thread pitch, so a bike with thru axles needs locking thru axles in that exact format. Check your axle type first.
            What happens if I lose the key for a keyed skewer set?
            That depends on the system. A coded set such as Pinhead ties replacement keys to the code supplied with the set, so record it somewhere safe on day one. Sets that use a shared special tool, like Hublox, are simpler to rescue because the tool is standard across the range. Without any key or tool, removal becomes a bike-shop job.
            Are gravity lock nuts as secure as keyed skewers?
            They solve the same problem differently. Gravity nuts cannot be turned while the bike stands upright, the position a locked bike sits in, and there is no key to copy or lose. Keyed skewers protect hollow quick-release axles, which gravity nuts cannot fit. Choose by your axle type first; both approaches are aimed at opportunistic theft, not power tools.
            Do I still need a regular lock with locking skewers fitted?
            Yes, always. Locking skewers and nuts secure wheels to the frame, and nothing more. They do not stop anyone carrying the whole bike away, so the frame still needs a proper lock through it and around a fixed object. Skewers are the second layer, protecting the parts your main lock cannot reach.
            Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
            Best Anti Theft Skewers For Bike Wheels: Secure…Check price on Amazon

            More from Amazon

            Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

            Amazon Prime

            Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

            Start a Prime free trial
            Prime for Young Adults

            A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

            See Prime for Young Adults
            Audible

            Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

            Try Audible free
            Amazon Music Unlimited

            Ad-free music streaming. Eligible new subscribers can start with a free trial.

            Try Music Unlimited free

            As an Amazon Associate we earn from qualifying purchases.