Key takeaways
- Find the best bike tarps for outdoor covering, from light 5 mil poly sheets to 30 mil clear vinyl, with sizes, grommet spacing and materials compared.
A tarp is a flat sheet. It has no sleeves for wheels, no elastic hem shaped to a frame, and no zipper designed around a bicycle. That is worth stating plainly, because a fitted cover and a tarp solve the same problem differently. A fitted cover wraps one bike neatly. A tarp drapes over whatever you put under it: two or three bikes leaned together, a stack of spare wheels, or a pile of gear in a damp garage. If your storage is a row of bikes under a carport, a balcony, or an open shed, the flat sheet is often the more flexible tool.
This guide compares five general-purpose tarps sold as flat sheets, in poly, vinyl, and canvas. Each pick lists size, thickness, and material exactly as the maker or listing states them, because tarp figures are listing figures: a mil number or a grommet spacing means only what that seller printed. Note the difference between cut size and finished size, and pick the sheet that matches how your bikes actually sit.
As an Amazon Associate, I earn from qualifying purchases.
How To Choose A Tarp For Bike Covering
Start With Thickness
Tarp thickness is given in mils, and the range here runs from 5 mil to 30 mil as listed. A 5 mil poly sheet is a light cover: easy to fold and drape over a single bike, best suited to sheltered spots such as a garage corner or covered porch. Heavier poly in the 12 to 20 mil range holds up better outdoors, where wind works at the edges. The 30 mil vinyl pick is the thickest sheet here, and its listed weight reflects that. Thicker is not automatically better: a heavy sheet over one bike on a small balcony is awkward to handle daily, while a light sheet left outside all winter wears faster at fold lines and grommets.
Cut Size Versus Finished Size
Many poly tarps are sold by cut size, the size of the material before hems are folded and stitched. The finished size, the sheet you actually receive, is smaller. One maker in this guide prints both numbers in its own size table, and the difference is roughly ten inches in length and six inches in width on a large sheet. Before ordering, measure the footprint of the bikes you want to cover, allow extra for the drop down the sides, and then check whether the listing quotes cut or finished dimensions. A tarp that only just reaches the ground on paper may hang short in practice and leave tires and drivetrains exposed at the bottom.
Material Choices
Woven polyethylene is the standard tarp material: light, waterproof as listed, and available in the widest size range. Vinyl tarps, including the clear pick below, are thicker and heavier, and a clear sheet lets light through, which suits lean-to storage where you still want to see the bikes. Canvas is the outlier. The canvas pick is listed as water resistant rather than waterproof, and canvas is heavier than poly of the same size. For bikes under a roof edge, where the job is keeping dust, spray, and drips off rather than holding back direct rain, many riders prefer how canvas drapes and its resistance to flapping.
Grommets And Tie-Downs
Grommet spacing is printed in each Specs list where the listing states it, ranging from every 18 inches to every 3 feet across these picks. Closer spacing gives more tie-down points, which matters outdoors: tie the sheet so wind cannot get under it and balloon it against the frames. Use bungee cords or soft rope through the grommets, and pad any point where the sheet presses on a saddle, grip, or painted tube.
The Five Tarps Compared
1. Kotap 16 x 20 Ft All-Purpose Poly Tarp (TRA-1620)
The Kotap TRA-1620 is the light, large, and simple option. Its listing describes a 5-mil woven and coated polyethylene sheet in blue, sized 16 by 20 feet at the cut. The maker’s own size table gives the finished size as 15 feet 2 inches by 19 feet 6 inches, a useful reminder to plan around finished dimensions. At this size, one sheet covers a row of bikes with room to spare, or folds double over a single bike in a sheltered corner. The maker states rust-proof aluminum grommets every 3 feet and on each corner. Three-foot spacing is wide, so outdoors, add intermediate ties along the edges rather than relying on corners alone. It folds small, stores easily, and suits indoor dust duty and covered outdoor storage better than fully exposed winter use.
Specs
- Size: 16 x 20 ft cut; 15 ft 2 in x 19 ft 6 in finished, per the maker’s size table
- Thickness: 5 mil, as listed
- Material: Woven and coated polyethylene
- Color: Blue
- Grommets: Rust-proof aluminum, every 3 ft and on each corner, per the maker
- Model: TRA-1620
2. Xpose Safety Heavy Duty White Poly Tarp, 20 x 24 Ft
The Xpose Safety white tarp steps up to a 12 mil polyethylene sheet, as listed, in a 20 by 24 foot size that suits a full storage bay, a carport row, or a stack of wheels and frames under one cover. White reflects sunlight rather than absorbing it, keeping the covered space cooler in direct sun, a sensible trait for outdoor storage in bright conditions. The listing gives the part number WHD-2024-X-A and describes the sheet as waterproof and rip and tear resistant. At 12 mil it sits mid-range here: noticeably more substantial than a 5 mil sheet, still manageable for one person to fold and move. Plan tie-downs carefully at this size, since a large sheet catches wind like a sail until secured on all sides.
Specs
- Size: 20 x 24 ft, as listed
- Thickness: 12 mil, as listed
- Material: Polyethylene (PE)
- Color: White
- Part number: WHD-2024-X-A
- Water resistance: Waterproof, as listed
3. Core Tarps Extreme Heavy Duty 20 Mil Tarp, Black, 12 x 16 Ft
Core Tarps lists this black sheet at 20 mil, the thickest polyethylene in the guide, in a 12 by 16 foot size that fits two or three bikes with working room around them. The listing states a weight of 11.87 pounds, grommets with 18-inch center-to-center spacing, and UV protection. That close spacing matters outdoors: ties every 18 inches keep the edge down and stop wind working a loose flap against the bikes. The listing describes the material as polyethylene with reinforced edges and a waterproof build. Black absorbs heat, so in hot sunny storage the space underneath warms up; for a shaded garage doorway or carport, that trade-off is usually acceptable in exchange for heavy fabric and dense tie-down points.
Specs
- Size: 12 x 16 ft, as listed
- Thickness: 20 mil, as listed
- Material: Polyethylene (PE)
- Color: Black
- Item weight: 11.87 lb, as listed
- Grommet spacing: 18 in center to center, as listed
- Model: CT-706-12X16
4. Core Tarps 30 Mil Extreme Heavy Duty Clear Vinyl Tarp, 8 x 16 Ft
The clear vinyl pick is the specialist of the group. Core Tarps lists it at 30 mil in vinyl, 8 by 16 feet, with an item weight of 13.61 kilograms as listed, by far the heaviest sheet here relative to its size. The listing states grommet spacing of 24 inches and UV protection, and describes the sheet as waterproof. Clear vinyl earns its place where light matters: over bikes in a lean-to or a bright porch enclosure, you can see the bikes without lifting the cover, and light reaching the space helps it dry after damp weather. The smaller footprint suits one or two bikes rather than a whole row. Given the listed weight, this is a fit-and-leave cover, not one you will enjoy folding daily.
Specs
- Size: 8 x 16 ft, as listed
- Thickness: 30 mil, as listed
- Material: Vinyl
- Color: Clear
- Item weight: 13.61 kg, as listed
- Grommet spacing: 24 in center to center, as listed
- Model: CT-201-8X16
5. Xpose Safety Canvas Tarp, 10 Oz Green, 5 x 7 Ft, 2-Pack
The canvas pick is sold as a two-pack of 5 by 7 foot sheets, sized for one bike each or for covering a wheel set and gear separately. Xpose Safety lists the fabric as 10 oz poly canvas and describes it as water resistant, a step below the waterproof wording on the poly and vinyl listings, and the article treats it that way: this is the pick for under-roof storage or a covered balcony, where the job is dust, drips, and spray rather than standing rain. The listing states double stitched hems and rust-resistant brass grommets. Canvas drapes closely, flaps less than light poly, and is gentle against paint. Two smaller sheets are also easier to wash and store than one large tarp.
Specs
- Size: 5 x 7 ft per sheet, 2-pack, as listed
- Fabric weight: 10 oz poly canvas, as listed
- Material: Poly canvas
- Color: Green
- Water resistance: Water resistant, as listed
- Grommets: Rust-resistant brass, as listed
- Hems: Double stitched, as listed
Using A Tarp Over Bikes Without Causing Damage
A tarp keeps weather off, but a careless setup can trap moisture against the bikes. Leave a low edge open or lift the sheet on dry days so air can move; a sealed, damp pocket under any cover encourages corrosion on chains, bolts, and brake rotors. Cover dry bikes, and lubricate the chain as usual first. Pad any point where the sheet rests on a saddle, grip, or painted tube. Outdoors, tie the tarp so it cannot flap: movement, not contact, is what scuffs paint over time. In a garage, a tarp also works as a dust sheet over bikes on wall hooks, as long as it stays clear of heaters and open flames.
Frequently Asked Questions
Is a tarp as good as a fitted bike cover for outdoor storage?
A tarp and a fitted cover do different jobs. A fitted cover wraps a single bike closely and is quicker to put on and take off. A tarp is a flat sheet that covers several bikes, wheels, and gear at once and folds away to almost nothing. For a row of bikes under a carport or in a damp garage, the tarp is the more flexible option. For one bike kept outside and ridden daily, the fitted cover is usually more convenient.
What thickness should I choose for bikes stored outside?
The listings in this guide run from 5 mil to 30 mil. A 5 mil sheet suits sheltered spots such as a garage or covered porch. For fully outdoor storage, the 12 mil and 20 mil poly picks give more fabric at the edges and grommets, where tarps usually fail first. Thickness figures are listing figures, so compare them within this guide rather than treating them as a universal standard.
How do I stop a tarp from damaging paint or trapping moisture?
Tie the sheet down so it cannot flap, since repeated movement scuffs finishes. Pad contact points at saddles, grips, and frame tubes with a soft cloth. Leave a low edge vented or lift the cover on dry days so the air underneath can change, and put the tarp over dry bikes rather than wet ones. Check under the cover after storms, and dry and re-lubricate the drivetrain if condensation has formed.
Does cut size or finished size matter when I order?
Yes. Some tarps are sold by cut size, the dimension before hemming, so the finished sheet is smaller. One maker in this guide lists a 16 x 20 ft cut size with a finished size of 15 ft 2 in x 19 ft 6 in. Measure the area your bikes occupy, add the drop you need down the sides, and compare that against the finished size where the listing gives one. Ordering a size up is the simple fix when the numbers are close.
FAQ
Is a tarp as good as a fitted bike cover for outdoor storage?
What thickness should I choose for bikes stored outside?
How do I stop a tarp from damaging paint or trapping moisture?
Does cut size or finished size matter when I order?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




